April 16th, 2009, 16:26 | #16 | ||
Quote:
Quote:
ok thnx ill try n putting the gearbox all back together n see if she runs, thanks |
|||
April 16th, 2009, 16:30 | #17 |
Official ASC Bladesmith
|
Ah, the classic "WTF?!? I tried a 9.6V battery and my gun got messed up inside!"
Yes, 9.6V batteries greatly increase the rate of wear, often it's the tappet plate or piston that suffers, but in your case a gear or two. Could also be that a tooth on a gear sheared off (I've seen it about a dozen times last year, even top of the line gears) and shredded the gear box with metal teeth. Not battery related really, just metal fatigue. |
April 16th, 2009, 19:34 | #18 |
aka SNK or Shaniqua
|
your links don't work because you pasted the wrong urls!
__________________
SHÖCK |
April 16th, 2009, 19:40 | #19 | |
__________________
Latest Infractions Received : Being a dumb ass - Inspired by pusangani Quote:
sexy time |
||
April 16th, 2009, 20:19 | #20 |
...I think i can tell you why it broke. Are those crappy .12's?
__________________
|
|
April 16th, 2009, 20:35 | #21 |
thanks a bunch KNIVEZS for postin the pics
yes those are the crappy ass .12's cuz i cant find .20's anywhere without ordering them from an online store.But i dont think it would break cuz of a .12 just my thought i actually dont know, well besides that.... as shown in the pics the spur gear was ripped of one of its teeth, so im guessing this is the problem. is there something else besides the 1 gear and my battery causing the problem??? if i need to, where and what kind of gears should i buy to replace these so my gun can live again and actually survive.OR if i really need to like someone suggested, which new gun should i save up for?? thanks |
|
April 16th, 2009, 20:39 | #22 | |
aka coachster
|
Quote:
|
|
April 16th, 2009, 20:44 | #23 |
put the gearbox back together and reshim carefully the gears! it should work i had one of my aks running with the same chipped tooth on the spur for like 1000 rounds ... was waiting for a replacement one to arrive
here ya go i found you a great shimming guide! http://www.858airsoft.com/upgrades/shim.html i know it's boring and time consuming but it's a VITAL thing to do to your aeg! hell i properly reshimmed 2 cyma mechboxes and runned them on a 11.1v lipo without a problem!
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 17th, 2009, 11:58 | #24 |
Official ASC Bladesmith
|
Looks like a typical metal fatigue issue of a geat tooth. Nothing else would cause the spur gear to break teeth like that.
|
May 1st, 2009, 18:50 | #25 |
ok guys im really sorry about not respondin for about 2 weeks, but i was busy n im trying to find out which new parts i should put in my gearbox (aka gears) and other things, so i dont really kno what to get, so this is what im thinking:
Gears: http://shop.ehobbyasia.com/upgrade-p...3-gearbox.html Which would u recomend? What would be the best thing for me to put in my gearbox (which gears,pistons,etc) or is even all of this necessary. Please help me out, and can u also suggest what else i can do to this gun?(metal body,better hop up unit,more magazines, grips etc) thanks alot for any help and suggestions |
|
May 1st, 2009, 19:19 | #26 |
Banned
|
Me for my Kraken i put a lower spring 330ftp.I thing it gona give a litle bit longer live.Maby not but it cant not be wost.Sorry for my english but i try my best
|
May 1st, 2009, 21:16 | #27 |
aka coachster
|
1) http://www.airsoftparts.ca/store2/in...oducts_id=1222
2) http://www.airsoftparts.ca/store2/in...oducts_id=1104 3) http://www.airsoftparts.ca/store2/in...roducts_id=760 4) http://www.airsoftparts.ca/store2/in...roducts_id=885 5) http://www.airsoftparts.ca/store2/in...roducts_id=636 might as well get a good gun. |
May 1st, 2009, 21:35 | #28 |
Quote:
|
|
May 1st, 2009, 22:18 | #29 | |
Quote:
ok some of the parts that were suggested, i dont think i really need most the extra parts such as the reinforced gearbox but thanks anyway. i wasw looking more into better bushings\bearings along with high speed gears, and a metal body with some some grips\stocks, wat u guys think?? n where should and what should i buy??? all help is appreciated!! thanks |
||
May 1st, 2009, 22:29 | #30 |
Don't get bearings, get solid metal bushings if you're getting some.
|
|
|
Bookmarks |
Thread Tools | |
|
|