|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 1st, 2009, 07:33 | #16 |
when you put your finger on the sear and pull your finger out if the receiver, does the sear move?
Im just curios is the sear will let the cylinder move back enough to for the sear to catch. If its jammed for some reason then it will prevent the cylinder from sliding back all the way. But now that I think about it, if you can remove and re-insert the cylinder, then that should not be the issue. |
|
April 7th, 2009, 17:16 | #17 | |
Quote:
I've just found out something else. I put in the marui spring, then the 130 spring. With the springs, it locks back! Despite still the rough bolt pull. Then i put in the 150...it doesnt lock back again. I have a feeling the rough bolt pull plays a part in the problem...just a thought... Last edited by gerardcb; April 7th, 2009 at 17:47.. |
||
April 7th, 2009, 18:50 | #18 |
maybe the 150 spring is too long... i bought a couple springs for my vsr10 (no 0trigger) and when i tried the 150 spring it wouldn't lock back either! 130 is fine but 150 not and is hard like a mothe*****ker to pull
just my 2 cents...
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 7th, 2009, 22:10 | #19 |
Do you have the neo piston? And u sure it really doesnt lock back? U sure its not that u didnt pull the bolt fully?
|
|
April 7th, 2009, 22:14 | #20 |
no ...stock piston... but yes i slammed it backward and wouldn't catch! maybe it not that the problem though... was just making a point
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 7th, 2009, 22:23 | #21 | |
A minor, using dad's ID
|
I don't think you really listened to Bean, but heres what he meant
Quote:
|
|
April 7th, 2009, 22:23 | #22 | |
Quote:
Have u also have had rough bolt pull? |
||
April 7th, 2009, 22:29 | #23 |
i have a 130 in my rifle (mag brand) and i'm firing at 420 fps and my rifle is very effective! i'm firing .30g bb's
and yes hard bolt pulls and push!
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 7th, 2009, 23:06 | #24 |
April 7th, 2009, 23:09 | #25 |
no it's cycling very smoothly! cylinder is greased on the outside + i sanded all seam lines inside the receiver!
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 7th, 2009, 23:17 | #26 |
April 7th, 2009, 23:31 | #27 |
A minor, using dad's ID
|
Gerard, if you are still having this problem, try looking at the several posts people have tried to help you with, but didn't see, by myself and Bean.
|
April 7th, 2009, 23:43 | #28 | |
Quote:
Now, it doesnt lock back even with the 130 spring... Both white rings are there btw. still... |
||
April 7th, 2009, 23:53 | #29 |
My guess is you've re-assembled a spring backwards in your Zero trigger...
|
|
April 8th, 2009, 00:03 | #30 | |
Quote:
EDIT: I just realized something. The Zero Trigger is jammed. When i push the sear and pull the trigger at the same time, it folds backwards but sometimes it doesnt go back to its place. Sometimes it stays folded back until i move it with my finger again. I dunno wat is causing the jam. Last edited by gerardcb; April 8th, 2009 at 22:47.. |
||
|
Bookmarks |
Thread Tools | |
|
|