ICS M4 gear box problem

[Zampaja]

ok so last night i finally removed the screws from the motor plate, I have two small ones about 8mm in diameter and 5mm thick I do not have the disc when I took the gun apart it wasn't there I'll see if i can find something and try it out,
thanks!

[mcguyver]

Originally Posted by Zampaja

ok so last night i finally removed the screws from the motor plate, I have two small ones about 8mm in diameter and 5mm thick I do not have the disc when I took the gun apart it wasn't there I'll see if i can find something and try it out,
thanks!

Well, that's your problem. The motor shim disc needs to be in there. No need to investigate things further.

[Zampaja]

fixed the motor and its connections so now that's good, i'll get a spacer asap (any ideas on what might be a temporary replacement? size? ) but I made another rookie mistake...
do you know which gear spacers go on which gear and in what order?

Thank you guys so much!

[Styrak]

Originally Posted by Zampaja

fixed the motor and its connections so now that's good, i'll get a spacer asap (any ideas on what might be a temporary replacement? size? ) but I made another rookie mistake...
do you know which gear spacers go on which gear and in what order?

Thank you guys so much!

They don't have a set "proper" way to go on. You have to know how to properly shim a mechbox.

[Zampaja]

It works!!!
Thanks guys!
I'm still not sure of what caused the prob but after re-wiring the motor, taking everything apart and putting it back together 3 times, 2 days of work, a costume made motor plate (small piece of plastic lol) and a lot of swearing it is now officially working!
I really appreciate your help I def couldn't have done it by myself...

[trevor]

i have a spare motor spacer plate for a ICS. Pm me if you need it.