WE 4.1 Hi-Capa Problem!

Freeze · December 20th, 2011, 06:00

Ah, I see. I just did some research on it, so I see how it makes sense and would happen.

I guess no more than one clip at a time then!

ILLusion · December 20th, 2011, 12:02

And now that we're finished with GBB 101, let's move on to Firearms 101:

Freeze · December 20th, 2011, 12:38

LOL. I know, I know.

But you know what I meant.

Freeze · December 27th, 2011, 21:23

Time to revive this thread with another problem -.-

If my hammer is not straight and is kinda tilted when looking from the back...does that mean anything?

When I say tilt, I mean that when it's uncocked, it tilts to the left. When cocked, it's tilted to the right...

Lycanthrope · January 5th, 2012, 19:26

I don't know that much about hammers, but I'd guess that something that holds it in is loose. This might mean that something has shifted when the gun was firing? (All speculation)

If I helped... then you're welcome

If not, then sorry I don't know

.

Also, next time I would buy a TM pistol. You have to pay a bit more, but then once you start buying all of the replacement parts to get your WE up and running with lower performance than the stock TM or even the stock WE, you will end up paying more for a worse gun.

Freeze · January 5th, 2012, 20:00

Ah, I never bothered to update this thread lol.

Turns out the mid-frame was cracked.

Freeze · April 1st, 2012, 14:23

Instead of creating a new thread, I decide to revive my old one.....

So......problem with gun...
I already googled and search on the forum. But nothing.

When cycling, the slide doesn't always go all the way back to neutral. Sometimes, it just stops like halfway, but it isn't due to the hammer getting caught on the internals.
The nozzle seems to jut out when this happens and it takes some effort to push it back into the slide.
The slide racks just fine without the mag inserted, but doesn't even cycle the first time unless I push the mag into the gun.

Any and all help is appreciated...

Styrak · April 1st, 2012, 14:29

Do you lubricate your nozzle/oring at all?

Freeze · April 1st, 2012, 14:40

Yeah, I just lubricated the whole gun.

Freeze · April 1st, 2012, 14:49

I've also noticed that the hammer takes more effort to cock than it should.

hattrick · April 1st, 2012, 17:17

Just read the entire thread. The biggest problem seems to be that you cheaped out and bought a WE instead of a TM.

Its not even worth it in the short run.....I cannot understand peoples attraction to cheap guns. YOU GET WHAT YOU PAY FOR.

I'd sell that POS and buy a TM.

/endrant - alex

Freeze · April 1st, 2012, 22:45

Too little too late....on buyin a WE......all I want to do is to fix this POS so that at keast it is usable.

I mean, if I sell it, it won't sell for much, so I might as well just spend a few bucks and a least make it work. And buy a better one after....

TaroBear · April 1st, 2012, 23:20

You might be able to sell it as a parts gun...

jordan7831 · April 1st, 2012, 23:43

Can you provide some pictures of the guts of the gun? that would help a lot.

Freeze · April 4th, 2012, 06:03

Pics of internals. Not really good due to bad camera....and no anti-shake feature...but hopefully you can tell~

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 20th, 2011, 06:00	#16
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Ah, I see. I just did some research on it, so I see how it makes sense and would happen. I guess no more than one clip at a time then! __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

December 20th, 2011, 12:02	#17
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	And now that we're finished with GBB 101, let's move on to Firearms 101: __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

December 20th, 2011, 12:38	#18
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	LOL. I know, I know. But you know what I meant. __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

December 27th, 2011, 21:23	#19
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Time to revive this thread with another problem -.- If my hammer is not straight and is kinda tilted when looking from the back...does that mean anything? When I say tilt, I mean that when it's uncocked, it tilts to the left. When cocked, it's tilted to the right... __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

January 5th, 2012, 19:26	#20
Lycanthrope Trader rating Join Date: Jan 2012 Location: New Zealand	I don't know that much about hammers, but I'd guess that something that holds it in is loose. This might mean that something has shifted when the gun was firing? (All speculation) If I helped... then you're welcome If not, then sorry I don't know . Also, next time I would buy a TM pistol. You have to pay a bit more, but then once you start buying all of the replacement parts to get your WE up and running with lower performance than the stock TM or even the stock WE, you will end up paying more for a worse gun.

January 5th, 2012, 20:00	#21
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Ah, I never bothered to update this thread lol. Turns out the mid-frame was cracked. __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

April 1st, 2012, 14:23	#22
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Instead of creating a new thread, I decide to revive my old one..... So......problem with gun... I already googled and search on the forum. But nothing. When cycling, the slide doesn't always go all the way back to neutral. Sometimes, it just stops like halfway, but it isn't due to the hammer getting caught on the internals. The nozzle seems to jut out when this happens and it takes some effort to push it back into the slide. The slide racks just fine without the mag inserted, but doesn't even cycle the first time unless I push the mag into the gun. Any and all help is appreciated... __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

April 1st, 2012, 14:29	#23
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Do you lubricate your nozzle/oring at all? __________________ Airsoft Sales and Repair/Upgrade Services

April 1st, 2012, 14:40	#24
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Yeah, I just lubricated the whole gun. __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

April 1st, 2012, 14:49	#25
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	I've also noticed that the hammer takes more effort to cock than it should. __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

April 1st, 2012, 22:45	#27
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Too little too late....on buyin a WE......all I want to do is to fix this POS so that at keast it is usable. I mean, if I sell it, it won't sell for much, so I might as well just spend a few bucks and a least make it work. And buy a better one after.... __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

April 1st, 2012, 23:20	#28
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	You might be able to sell it as a parts gun... __________________ This message was brought to you by Umbrella Inc.

April 4th, 2012, 06:03	#30
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	Pics of internals. Not really good due to bad camera....and no anti-shake feature...but hopefully you can tell~ __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

WE 4.1 Hi-Capa Problem!

Doctor's Corner