Magpul PTS screw lost...

[HKGhost]

You're welcome.

[Matula]

Thank you a lot HKGhost but this screw is the D5 not the D20, it's the another one i need ;(
If you can send me again a picture and if you have a rules to get the diameter and the length, i will hug you !!!

You're welcome.

[HKGhost]

It's the same size screw but a tiny bit longer. But I'm sure the length and size I posted will still work just fine.

[Kampfer]

M4x17mm .

[Matula]

Thank you Kampfer,
That's i find :

It's strange cause i got 2 thing different on internet with our information.


or

Originally Posted by Kampfer

M4x17mm .

[HKGhost]

wait, so you needed the D20 screw and not the D5? You gotta be more clear in your post so we can help.

[Matula]

Sorry HKGhost, if i wasn't clear.

But if you can shoot a pic, it's more for the thread cause i think it's really specific.

I wrote,

Originally Posted by sammer

.... I finally decided to find a solution. If someone can give me all information about the item ( size, ratio, thread.... ) That's will be awesome!

On the manual its D20 ( last part of the handle... )

Thx

Originally Posted by HKGhost

wait, so you needed the D20 screw and not the D5? You gotta be more clear in your post so we can help.

[Kampfer]

M4 Fine thread (0.7mm pitch), counter Sink

McMasterCarr
PartNumber: 91801A224 or 97613A532
Use the 20mm one since I measured the thread length as 17mm long not including the head

[Matula]

Perfect, i will order a pack tonight

Thank you a lot!!!

Originally Posted by Kampfer

M4 Fine thread (0.7mm pitch), counter Sink

McMasterCarr
PartNumber: 91801A224
Use the 20mm one
I measured the thread length as 17mm long not including head

[funkyboss]

Lucky boy!