Need a few tips from your own experience

lemegacool · May 14th, 2009, 20:40

i upgraded a friend's well l96 and had to do some filing and modding to fit parts, only clone that is worth upgrading imo is the bar10 from jg, i own one (gspec) and upgraded it with approx 500$ worth of parts and everything went fine!

Malice Army · May 14th, 2009, 20:45

which parts did you have to file? you filed the original part or the aftermarket part?

lemegacool · May 14th, 2009, 20:46

the pdi hop up... it was a bitch to align properly with the cylinder nozzle

Malice Army · May 14th, 2009, 21:18

I know there are 2 different hop ups availible; one accepts the stock barrel and one accepts a barrel that is like an AEG. the stock style is $25 and the other is like $75 , I used the cheaper option with no problem with a Modify Taper Cylinder nozzle not the stock one, and I used teflon tape on all the threads as back up to the o ring

TokyoSeven · May 14th, 2009, 22:08

If your just going to be plinking, go for a pellet gun, because if you are all about the accuracey then you will be somewhat disapointed with the stock airsoft guns peformance. Pellet gun is the way to go for target shooting. If your hellset on an airsoft gun just buy the L96 dont worry about upgrades and just go with it. Bolt action guns are not really entry level friendly but thats more of an opinion than anything else.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 14th, 2009, 20:40	#16
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	i upgraded a friend's well l96 and had to do some filing and modding to fit parts, only clone that is worth upgrading imo is the bar10 from jg, i own one (gspec) and upgraded it with approx 500$ worth of parts and everything went fine! __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

May 14th, 2009, 20:46	#18
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	the pdi hop up... it was a bitch to align properly with the cylinder nozzle __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

May 14th, 2009, 21:18	#19
Malice Army Trader rating Join Date: Jun 2008 Location: St. Catharines ON	I know there are 2 different hop ups availible; one accepts the stock barrel and one accepts a barrel that is like an AEG. the stock style is $25 and the other is like $75 , I used the cheaper option with no problem with a Modify Taper Cylinder nozzle not the stock one, and I used teflon tape on all the threads as back up to the o ring Last edited by Malice Army; May 14th, 2009 at 21:20..

May 14th, 2009, 20:45	#17
Malice Army Trader rating Join Date: Jun 2008 Location: St. Catharines ON	which parts did you have to file? you filed the original part or the aftermarket part?

May 14th, 2009, 22:08	#20
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	If your just going to be plinking, go for a pellet gun, because if you are all about the accuracey then you will be somewhat disapointed with the stock airsoft guns peformance. Pellet gun is the way to go for target shooting. If your hellset on an airsoft gun just buy the L96 dont worry about upgrades and just go with it. Bolt action guns are not really entry level friendly but thats more of an opinion than anything else. __________________ "Its only a little bit on fire"

Need a few tips from your own experience

Newbie Tank