ics m4 setup

[Wolf13]

here is my set up for my ics m4 right now....

Systema TB barrel
upgraded upper gearbox
9.6v 3300 mah battery(i need to upgrade but dont no to what)
fore grip bi-pod
5000 round drum mag
A cog scope
Classic army silencer
Folding stock
and a cheap little gun light
What can i add to this gun to make it better?

[TCLP]

Originally Posted by Wolf13

here is my set up for my ics m4 right now....

Systema TB barrel
upgraded upper gearbox
9.6v 3300 mah battery(i need to upgrade but dont no to what)
fore grip bi-pod
5000 round drum mag
A cog scope
Classic army silencer
Folding stock
and a cheap little gun light
What can i add to this gun to make it better?

Where are you from that way we can give yopu local FPS and if A 9.6V 3300mah battery isn't enough then you either have to strong a spring or you need more trigger control. Also list the upgrades to your upper.
And get high caps at least if your going to shoot that much as you don't see m4's with drum mags in the real world.

[Donster]

if the gearbox comes with nylon bushings, replace them with metal ones. Your current battery sounds find IMHO. replace the crappy systema barrel with either a Prometheus, Madbull or KM. They are solid performers and not that pricy. I personally think that systema barrels suck. what is your mechbox upgraded with? it might need more than you think.
P.S: Fill out your profile

[Wolf13]

Originally Posted by DONSTER 125

if the gearbox comes with nylon bushings, replace them with metal ones. Your current battery sounds find IMHO. replace the crappy systema barrel with either a Prometheus, Madbull or KM. They are solid performers and not that pricy. I personally think that systema barrels suck. what is your mechbox upgraded with? it might need more than you think.
P.S: Fill out your profile

here is my mech box upgrade: http://www.airsplat.com/Items/AC-UPI-MA120K.htm

[Donster]

well there is not much else you could do to your gun. Your battery is ideal for what you are running and so long as the nylong bushings (if ICS used them) are replaced with metal ones, the only thing that i would do, would be to get a slightly longer inner barrel (from one of the companies that i mentioned before) and use the silencer to cover it up. This way, you will get ideal accuracy and range and so long as you plan to keep the silencer on permanently, looks wont be sacrificed either.

[peacekeeper]

ditch the drum mag , cause it aint no lmg , but then again thats my opinion

[Death March]

What do you want from your set-up? indoor or outdoor? I think the newer ICS have metal bushings in them now for sometime.
My ICS M4,has the MA-56 upper package,Sysytma gears,top power bushings,Prometheus 6.03 (407mm) G&P crane stock with a G&P 2200 NiMah battery.This set-up runs 398 fps for me.I don't useit as much as I use to,but it's 4 years old now and still going! I have other upper cyl. set-ups (4-5) for indoor use. I don't think that drum mag will work with ICS,but if you can try one out before you buy would be awsome. The biggest problem I have with mine is finding Mags that work in it.I have a mag-clamp with two ICS Hi-caps lol. They were the only ones that worked in mine. Hope that helps some,Cheers!

[HaZarD SFD]

Drum march.. use Mag brand mags.. they work fine.. I have 9 midcaps.

[AngelusNex]

Originally Posted by TCLP

Where are you from that way we can give yopu local FPS and if A 9.6V 3300mah battery isn't enough then you either have to strong a spring or you need more trigger control. Also list the upgrades to your upper.
And get high caps at least if your going to shoot that much as you don't see m4's with drum mags in the real world.

Yes you do! Just ever so very rarely. Also most games have rules about drum mags in standard rifles.

[chompizikstan]

If you haven't already get a firefly or systema bucking a tightbore is useless w/the stock ICS bucking.