AEG batteries in canada?

[gerbalfarm]

Does anyone know of any sites that I can order a battery for a G&G L85A1? Preferably somewhere in canada .They seem to be difficult to track down, that or I'm one step closer to being completley retarded...

[Hades]

Not in Canada but still highly praised http://www.cheapbatterypacks.com/main.asp?sid=1175628

Also most stores that sell RC cars should be able to build you a battery pack

[Mantelope]

CBP is spectacular; their shipping is actually cheap and fast, over USPS. No duties whatsoever unless you're ordering NiCads, then there's some hazardous material levy.

[gerbalfarm]

thanks guys! i get to spend the next while learning about batteries now, as I have to custom order/make a battery for the l85....yippy. that site is great though thanks again.

[SHÖCK]

You can also visit hobby stores locally.

Airsoft just uses batteries that are usually made for R/C etc. and my local hobby store has batteries that are the same as airsoft.

[gerbalfarm]

the problem i'm running into, is that the sites don't have the cell configuration I need. the L85 takes a custom configuration. That and I don't know what type of connector I'll need. There tamiya large/small, male/ female ends and than there's tamiya airsoft small male/female ends. I just ordered this gun and don't have it in hand yet, so it looks like i'm going to have to wait until it arrives. Once it arrives I'll see if theres any hobby stores in Edmonton that can build one for me.

[kalnaren]

http://www.cheapbatterypacks.com/mai...=112&model=652

The R85 is a G&G clone, so this battery will fit fine.

[Styrak]

You can custom build any shape battery you want at CheapBatteryPacks.

[gerbalfarm]

cool kalnaren, thanks. from everything i had read when doing some research I needed a custom battery where the 7th cell is attached via a 1inch length of wire, but if this will work I'll take it, though i don't know what the 4/5sc type of battery is... You guys would'nt happen to know what type of connector I'll need? I have'nt been able to find that information anywhere. I'm pretty sure I'll need the male end on the battery but I don't know what size. Thanks for all the help.

[Mantelope]

If you're using CBP for a custom pack, you can just send the guy a picture of what you want the battery to look like and he'll do it pretty perfectly.