|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 7th, 2008, 20:36 | #1 |
AK Metal Body Installation
Hey guys:
for the element AK metal body, I noticed that that back (where the stock attaches) looks a bit different from the stock plastic body. It only has 2 tangs on the sides that connect to the stock. It doesn't have the tangs on the top and bottem where the stock screws go through. How do I install this metal body on a kraken? Thanks! |
|
March 9th, 2008, 16:56 | #2 |
AK Guru
|
Look closer at the stock plastic body. They are the same, stock, and Element ones.
Hint - Most Krakens have clear plastic bodies. Thus anything that's not clear colored can be removed and installed onto another one
__________________
|
March 9th, 2008, 17:15 | #3 |
Disassemble as per this video:
http://www.mechbox.com/site/ak-47-up...bly-video.html Reassemble as per this video, only using your metal body instead. http://www.mechbox.com/site/ak-47-up...bly-video.html
__________________
|
|
|
Bookmarks |
Thread Tools | |
|
|