40mm Shower Reassembly

gamz · July 3rd, 2007, 11:53

Well purchased 2 new BB showers, and they wouldn't work. N00bishly, I opened them up and of course the 8 bearings came out, so now I need to reassemble both BB showers.

I searched and found an old link to airsoft-guides.com, which no longer works.

Anyone have a DIY or guide to get this thing back together?

HaZarD SFD · July 3rd, 2007, 12:25

This is what I was talking about gamz http://www.ascarmoury.com/product_in...roducts_id=731

gamz · July 3rd, 2007, 12:36

Yeah, I saw that. Out of stock unfortunately, but shouldn't be too hard to do it without those kits. I just need to know what goes where.

Oh, and I have the 165rd KA shells:

HaZarD SFD · July 3rd, 2007, 12:44

well that ring allows you to put in that bearing set one at a time then youdrop it in then put in the spring and pin.. and your done..

Whozat · July 4th, 2007, 01:27

Actualy, the spring and pin go in first, then the bearings. Once you've got then all in, turn the "notch" on the ring away from the holes and it will hold the pin and spring in place alowing you to assemble the rest of the grenade. A thin peice of card stock, cut to size and taped in a ring will do the job just fine. Just cut the same notch in it that you see in the pic.

Has worked for me in a pinch. Let me know if you need any of those bearings, I've got about 500 of 'em.

Good luck,

gamz · July 4th, 2007, 10:34

Got it all reassembled. Took about 10 minutes, but was pretty frustrating

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 3rd, 2007, 11:53	#1
gamz Trader rating Join Date: Apr 2004 Location: Ottawa, ON \| St. John's, NL	40mm Shower Reassembly Well purchased 2 new BB showers, and they wouldn't work. N00bishly, I opened them up and of course the 8 bearings came out, so now I need to reassemble both BB showers. I searched and found an old link to airsoft-guides.com, which no longer works. Anyone have a DIY or guide to get this thing back together? __________________ Grenadier Weapons SRC Colt M4A1 FMU + CA Military M203 Long \| TM G3 SAS \| TM G3A3 \| KJW Beretta M9 FMU _______________________________ Ottawa Valley Airsoft

July 3rd, 2007, 12:25	#2
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	This is what I was talking about gamz http://www.ascarmoury.com/product_in...roducts_id=731 __________________ No Comment.

July 3rd, 2007, 12:36	#3
gamz Trader rating Join Date: Apr 2004 Location: Ottawa, ON \| St. John's, NL	Yeah, I saw that. Out of stock unfortunately, but shouldn't be too hard to do it without those kits. I just need to know what goes where. Oh, and I have the 165rd KA shells: __________________ Grenadier Weapons SRC Colt M4A1 FMU + CA Military M203 Long \| TM G3 SAS \| TM G3A3 \| KJW Beretta M9 FMU _______________________________ Ottawa Valley Airsoft

July 3rd, 2007, 12:44	#4
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	well that ring allows you to put in that bearing set one at a time then youdrop it in then put in the spring and pin.. and your done.. __________________ No Comment.

July 4th, 2007, 01:27	#5
Whozat Trader rating Join Date: Jan 2004 Location: New Westminster, B.C.	Actualy, the spring and pin go in first, then the bearings. Once you've got then all in, turn the "notch" on the ring away from the holes and it will hold the pin and spring in place alowing you to assemble the rest of the grenade. A thin peice of card stock, cut to size and taped in a ring will do the job just fine. Just cut the same notch in it that you see in the pic. Has worked for me in a pinch. Let me know if you need any of those bearings, I've got about 500 of 'em. Good luck, __________________ Paul / Whozat BCAC Last edited by Whozat; July 4th, 2007 at 01:33..

July 4th, 2007, 10:34	#6
gamz Trader rating Join Date: Apr 2004 Location: Ottawa, ON \| St. John's, NL	Got it all reassembled. Took about 10 minutes, but was pretty frustrating __________________ Grenadier Weapons SRC Colt M4A1 FMU + CA Military M203 Long \| TM G3 SAS \| TM G3A3 \| KJW Beretta M9 FMU _______________________________ Ottawa Valley Airsoft

40mm Shower Reassembly

Doctor's Corner