TM 226 Not Feeding.

[Renegade)]

TM P226 has stopped feeding bb's from the mag during cycle. It will fire the first one after I rack the slide, but after that it just keeps cycling like normal, but somehow not feeding the bb's up to shoot. Very wiered problem, I had the Shooters Design cycle kit installed by ILLusion and worked flawlessly, and I figured maybe it was a loading nozzle issue so I just put the stock one back in, but same thing.

Any ideas what this could be? Im stumped.

[BloodSport]

what internal upgrades do you have if any?

[Renegade)]

Spoke to Wiseowl, I mean Bloodsport lol about it further, He posed a sugestion from his personal P226, I will look into it further when I get some spare time and update on the matter for anyone else interested.

Thanks

[bundun]

Hate to necro post, but I'm having the same problem: bb's don't feed and the slide doesn't lock when the mag is out of bb's. How did you fix it Renegade? I have the following parts on my gun:

guarder metal body/slide
150% hammer/recoil springs
upgraded piston lid

[CalvinTat]

Bundun: I had a similar issue as Renegade) did, where upon installation of my 150% Hammer spring it would fire the first shot and the slide would not blowback far enough to both A) rack next BB and B) lock slide back when empty. I found that by placing the old stock hammer spring the gun fired and has fired since without issue. Switch your Hammer springs and see what happens. I'd been meaning to look into why the heavier hammer spring caused the gun to fire essentially weaker, but I've been too lazy/busy.

[bundun]

Thanks, I'll try that...if I can find the old spring...I have no idea where it would be :\

[Renegade)]

My issue is 100% fixed, I had to do 2 things.

1: Replace the valve blocker inside the blow back assembly, its the peice that holds the valve in place up inside the muzzle, it develops tiny hairline cracks which cause the gun to misfire.

2: oil the tip of the nozzel with a q tip.

I have little issues now on account of doing both of those (thanks to Wiseowl and Stalker)

Sometimes the slide doesnt lock back simply on account of the speed of the slide if you fire a whole lot.

[bundun]

which part number is that valve blocker... is it 17?

[Renegade)]

Guarder Enhanced Valve Blocker

P226-06 is the part number.

Show me a diagram tho and ill pick it out of that if u need me too.

[bundun]

ok, yah that part was broken on my gun almost as soon as i bought it, it got replaced with one from a hi-capa i believe...maybe i'll just get the guarder enhanced one.
it's this right? http://www.wgcshop.com/pcart/shopper...20for%20Pistol

[Renegade)]

Yep thats it, cheap part but helps wonders. good luck its a bitch to install :P

[bundun]

I took my valve blocker out and looked at it and it's not cracked or anything, i tried lubeing everything and it still wouldn't work, so I tried putting the old hammer spring in like CalvinTat suggested and that seems to solve it. I might order an enhanced valve blocker anyway in case mine does break, but for now the problem seems to be solved. Thanks for the help guys.