Glock 18c Technical blunder

whoreable · June 7th, 2007, 03:23

Anyways, had this pistol for about 3 years. Recently it started to get stuck on itself when the slide was forward and the weapon is "Cocked".

Ive disasembled and tried a whole bunch of solutions.

What Ive noticed is, the Inner barrel is going Downwards, and its kinda stuck on the outer barrel, hard to imagine visually i know.

I look down the barrel and you can see it slighly aimed downwards. If i stick a finger in there and push it 1cm up or so, itll slide back.

Ive cleaned the recoil rod, spring, insides ect. 1/4 times the slide will work flawlessly, but the others require alot of force, or the barrel move trick.

Anyways, Would buying a new Innerbarrel/OuterBarrel fix this? Or does this sound like a Recoil Spring issue, maybe not holding it in the correct position.

Thank you!

Whoreable

whoreable · June 7th, 2007, 05:40

Edit, FIXED.

Added some Ducttape around the inner barrel,

wrapped it 3 "laps" around.

The barrel is now less movement, and it cocks flawless

Dirty Deeds · June 7th, 2007, 09:03

It will also be more accurate like that. I used a larger o-ring in mine.

vatek · June 7th, 2007, 14:04

DD, what size O-ring did you use?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 7th, 2007, 03:23	#1
whoreable Trader rating Join Date: Feb 2003	Glock 18c Technical blunder Anyways, had this pistol for about 3 years. Recently it started to get stuck on itself when the slide was forward and the weapon is "Cocked". Ive disasembled and tried a whole bunch of solutions. What Ive noticed is, the Inner barrel is going Downwards, and its kinda stuck on the outer barrel, hard to imagine visually i know. I look down the barrel and you can see it slighly aimed downwards. If i stick a finger in there and push it 1cm up or so, itll slide back. Ive cleaned the recoil rod, spring, insides ect. 1/4 times the slide will work flawlessly, but the others require alot of force, or the barrel move trick. Anyways, Would buying a new Innerbarrel/OuterBarrel fix this? Or does this sound like a Recoil Spring issue, maybe not holding it in the correct position. Thank you! Whoreable

June 7th, 2007, 09:03	#3
Dirty Deeds Trader rating Join Date: May 2004 Location: Montreal	It will also be more accurate like that. I used a larger o-ring in mine. __________________ Team Bad Karma(BK-09) CAUTION: Evil Genius at Work Those that wear the "Tin Foil Hat" stand on guard for thee. All others stand on guard for themselves.

June 7th, 2007, 05:40	#2
whoreable Trader rating Join Date: Feb 2003	Edit, FIXED. Added some Ducttape around the inner barrel, wrapped it 3 "laps" around. The barrel is now less movement, and it cocks flawless

June 7th, 2007, 14:04	#4
vatek Trader rating Join Date: Feb 2006 Location: Calgary	DD, what size O-ring did you use?

Glock 18c Technical blunder

Doctor's Corner