|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 12th, 2007, 16:09 | #1 |
KJW Beretta Trigger (how to remove)
I was wondering... how to remove the trigger so i can fix the trigger spring on my KJW Beretta.
Thank You |
|
March 12th, 2007, 16:53 | #2 |
__________________
|
|
March 12th, 2007, 17:44 | #3 |
Yes it is part #37. So it appears like i have to dismantle the whole gun?
|
|
March 12th, 2007, 18:03 | #4 |
Did your gun include a manual or no?
First step is removing the slide from the lower frame. From Arnies "Field stripping the M9 is quite simple: release the mag; cock back the hammer; push down the button above the trigger guard on the right side while rotating the take down lever on the left side clockwise by 90 degrees; and slide the slide assembly right out. Getting the spring guide rod out can be a bit more trickier. You need to first pull out the end that's inserted inside the chamber, then rotate the springer guide rod by 180 degrees, and then slide it back out under the chamber."
__________________
|
|
March 12th, 2007, 19:01 | #5 |
I do not have manual (the gun didn't come with one)
|
|
|
Bookmarks |
Thread Tools | |
|
|