7mm Bushings

[BlackTiger]

I'm looking to see if anyone knows if the following bushings would fit a Systema Reinforced Gear Box. I know they need to be 7mm, I'm just not sure if the follow set are 7mm. Thanks.

http://www.airsoftcanada.com/showthr...light=bushings

Systema Oilless Bushing for v2, 3 & 7
Made with sintered metals, these bushings "sweat" oil when heated up due to friction from the rotating gear axles - minimizing the need for frequent regreasings.
Brand new in packaging.
Price: $25
Qty: 4

[Denis[teamplayer]]

no I don't think they are, numbers listed are only for gearbox versions, 7mm bushings are clearly described.

I ordered a set of 7mm bushings (king arms I think) from ehobbyasia.com
great price.

http://cgi.ebay.com/King-Arms-Airsof...em270090939383

[ILLusion]

Originally Posted by BlackTiger

I'm looking to see if anyone knows if the following bushings would fit a Systema Reinforced Gear Box. I know they need to be 7mm, I'm just not sure if the follow set are 7mm. Thanks.

http://www.airsoftcanada.com/showthr...light=bushings

Systema Oilless Bushing for v2, 3 & 7
Made with sintered metals, these bushings "sweat" oil when heated up due to friction from the rotating gear axles - minimizing the need for frequent regreasings.
Brand new in packaging.
Price: $25
Qty: 4

NO, those bushings are 6mm bushings.

7mm bushings are rare, but not impossible to find. You'll have an easier time looking for 7mm bearing bushings.

[Denis[teamplayer]]

Edit: my mistake, thanks satanic pope
you can try airsoftparts.ca [jugglez] or ehobbyasia.com shouldn't be too difficult

[yanhchan]

I suggest getting the bushings from a US retailer I found Depot 53 had them last night.

[satanic pope]

Originally Posted by Denis[teamplayer]

don't you mean 6mm will be easier to find?
you can try airsoftparts.ca [jugglez] or ehobbyasia.com shouldn't be too difficult

No he meant to say 7mm BEARING BUSHINGS like his post said. They're not the cheapest things in the world but they do work quite well. I've used them in my SR-16 for years and the only reason I replaced the last set was because a gear blew and I couldn't get the bearings off of the gear shaft. But they work really well. I haven't had and problem running them off a high upgrade since I started using them.

[ILLusion]

Bearing bushings aren't meant to be used with stock Marui gears. They don't fit on them well and will actually seize on to the axles... as satanic pope mentioned. I'd recommend bearings only be used on aftermarket gear sets.