ksc g19 fireing problems

DB19 · July 25th, 2006, 23:19

hello im having some problems with my ksc g19 i just bought used but looks to be brand new the problem is that when the mag is filled with propane and i pull the trigger you can here the click and nothing happens i think it may be light strikes also the mag is leaking through the top valve and i dont know if this will help but the hammer keeps you from flield striping it because its in the way of the back of the slide when the gun is cocked also when you pull the trigger if you pull it just slightly the gun will shoot (dry fireing)

thanks

Greylocks · July 26th, 2006, 10:33

http://www.airsoftcanada.com/showthread.php?t=14505

CDN_Stalker · July 26th, 2006, 10:57

Wow, must have a cheapo dollar store keyboard, the ones without puncutation keys!

The hammer has to be cocked in order to flied strip the gun.

When you filled the mag with gas, did you hold the mag and container upside down to fill? Need to have the liquid gas in the mag, not the gas itself.

DB19 · July 26th, 2006, 13:21

yes all these things i did im not a newb and when the hammer is cocked it still sticks up a ways so the slid hits it and yes i know how to fill a gbb mag

CDN_Stalker · July 26th, 2006, 14:10

Not to be condescending but bases have to be covered in cases where there isn't much info. Be surprised how many relatively new players never knew these things (aka. no expereince with GBBs).

Try using a flat peice of metal to insert in between the hammer and slide and try to press the hammer down a bit more. Could also be the 'firing pin' release to the left of the hammer, it sticks up out of the frame.

Greylocks · July 26th, 2006, 14:12

You're SOL then. Find a local doctor.
And please make some effort to type? Your statement is painful to read and difficult to understand.

Even better, find a local Doctor who can verify your age at the same time.

DB19 · July 26th, 2006, 14:49

SORRY for my typing and I live in a small town so I can't do either of those options

Greylocks · July 26th, 2006, 14:58

Your choices are limited. Take a visit to Grande Prairie, or Prince George, or mail your gun out to someone who knows what to do. You've been a member since 2004, so you should know where to look for resources, direct help, and information.

What I dont get is if you are alone in your area, where do you play? It's not legal to use those things just anywhere.

DB19 · July 26th, 2006, 15:12

I own about 1000 acres of land and I have a couple of friends that play right now more are getting into it.

ILLusion · July 26th, 2006, 16:08

The hammer spring may be too weak to strike the valve with any measure of power.

It gets weak when the gun is left cocked for a length of time. The hammer spring may need to be replaced if that is the case.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 25th, 2006, 23:19	#1
DB19 Trader rating Join Date: Nov 2004 Location: Chetwynd, BC	ksc g19 fireing problems hello im having some problems with my ksc g19 i just bought used but looks to be brand new the problem is that when the mag is filled with propane and i pull the trigger you can here the click and nothing happens i think it may be light strikes also the mag is leaking through the top valve and i dont know if this will help but the hammer keeps you from flield striping it because its in the way of the back of the slide when the gun is cocked also when you pull the trigger if you pull it just slightly the gun will shoot (dry fireing) thanks __________________ Age Verifier for Chetwynd, Fort St. John, Grande Prairie, and surrounding areas.

July 26th, 2006, 10:57	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Wow, must have a cheapo dollar store keyboard, the ones without puncutation keys! The hammer has to be cocked in order to flied strip the gun. When you filled the mag with gas, did you hold the mag and container upside down to fill? Need to have the liquid gas in the mag, not the gas itself. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

July 26th, 2006, 13:21	#4
DB19 Trader rating Join Date: Nov 2004 Location: Chetwynd, BC	yes all these things i did im not a newb and when the hammer is cocked it still sticks up a ways so the slid hits it and yes i know how to fill a gbb mag __________________ Age Verifier for Chetwynd, Fort St. John, Grande Prairie, and surrounding areas.

July 26th, 2006, 10:33	#2
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	http://www.airsoftcanada.com/showthread.php?t=14505

July 26th, 2006, 14:10	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Not to be condescending but bases have to be covered in cases where there isn't much info. Be surprised how many relatively new players never knew these things (aka. no expereince with GBBs). Try using a flat peice of metal to insert in between the hammer and slide and try to press the hammer down a bit more. Could also be the 'firing pin' release to the left of the hammer, it sticks up out of the frame. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

July 26th, 2006, 14:12	#6
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	You're SOL then. Find a local doctor. And please make some effort to type? Your statement is painful to read and difficult to understand. Even better, find a local Doctor who can verify your age at the same time.

July 26th, 2006, 14:49	#7
DB19 Trader rating Join Date: Nov 2004 Location: Chetwynd, BC	SORRY for my typing and I live in a small town so I can't do either of those options __________________ Age Verifier for Chetwynd, Fort St. John, Grande Prairie, and surrounding areas.

July 26th, 2006, 14:58	#8
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	Your choices are limited. Take a visit to Grande Prairie, or Prince George, or mail your gun out to someone who knows what to do. You've been a member since 2004, so you should know where to look for resources, direct help, and information. What I dont get is if you are alone in your area, where do you play? It's not legal to use those things just anywhere.

July 26th, 2006, 15:12	#9
DB19 Trader rating Join Date: Nov 2004 Location: Chetwynd, BC	I own about 1000 acres of land and I have a couple of friends that play right now more are getting into it. __________________ Age Verifier for Chetwynd, Fort St. John, Grande Prairie, and surrounding areas.

July 26th, 2006, 16:08	#10
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The hammer spring may be too weak to strike the valve with any measure of power. It gets weak when the gun is left cocked for a length of time. The hammer spring may need to be replaced if that is the case. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

ksc g19 fireing problems

Doctor's Corner