|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 9th, 2016, 19:22 | #1 |
TM Glock Sights always coming off
My front and rear sights are always getting loose after a couple magazines through my glock. What do I do? Can i just add superglue to the front sight screws? Also I think its the vibrating issue that's unscrewing them... anyone know where I can get tiny washers to prevent this from happening?
I have a metal slide |
|
June 9th, 2016, 19:28 | #2 |
Little bit of blue loctite to keep screws from backing out...?
__________________
Looking to get age verified in York region? Click link... |
|
June 9th, 2016, 21:04 | #3 |
I used teflon tape to wrap the screw, but eventually the rear sight cracked. The TM plastic sights are pretty fragile from what I've seen, I'd recommend saving for a set of metal replacements.
I think the Guarder steel sights are the cheapest, but you can always get fancy fiber optic ones. |
|
June 12th, 2016, 19:47 | #4 |
Thanks for the inputs! I fixed it with some teflon tape. Works perfectly.
I was using metal sights btw (i should have said metal glock sights instead of TM glock sights in the title derp) |
|
July 26th, 2016, 17:29 | #5 |
i was having this problem with a subcompact glock.
mine were still loose. |
|
|
Bookmarks |
Thread Tools | |
|
|