|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 28th, 2016, 18:19 | #16 |
Ive had good luck with using hylomar blue on the seals for gaskets. It never sets/drys. It seals well with original gaskets. Coat seals and reassemble. Can come apart afterwards if needed.
Works good on we gen1 mags along with original seal. No good if you don't use original seal (even good rtv doesn't cut it well without seal imho)
__________________
Looking to get age verified in York region? Click link... |
|
April 28th, 2016, 18:59 | #17 |
On these mags, the only way to remove the follower or the spring is through the base plate not the upper end so I want to wait until I get the follower part sorted before I properly seal the mag altogether.
|
|
April 29th, 2016, 03:04 | #18 | |
Quote:
|
||
|
Bookmarks |
Thread Tools | |
|
|