|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 17th, 2015, 05:16 | #1 |
A&K masada
So.. I got some time lately to start putting my a&k masada back together after replacing the wiring and after attempting to put in the selector switch I snapped the selector plate in two...:banghead: so I obviously need a replacement. Would a normal m4/m16 selector plate work? maybe with some modification? if not, where can I buy the right one?
ps, I've searched for hours for the answer and can't find anything on google... |
|
November 17th, 2015, 13:49 | #2 |
I actually bought a used masada which was missing the selector switch on one side. No luck finding it anywhere so I contacted A&K directly, they sent me to Evike as their NA distributor.
|
|
November 17th, 2015, 13:55 | #3 | |
Quote:
Sent from my Z933 using Tapatalk |
||
November 17th, 2015, 15:35 | #4 |
My Masada is in pieces at the moment, but I don't remember there being much difference to a standard m4/16 plate. Looking at airsoftdepot the drop in Masada gearbox, the plate looks very similar. I'd try a m4 plate and mod if needed
__________________
Looking to get age verified in York region? Click link... Last edited by cetane; November 17th, 2015 at 15:41.. |
|
November 17th, 2015, 16:06 | #5 |
When I had my A&K I replaced the entire gearbox with a standard m4 one everything worked including the selector plate except obvs the nozzle
Sent from my Nexus 6P using Tapatalk
__________________
The object of war is not to die for your country but to make the other bastard die for his. |
|
November 17th, 2015, 22:41 | #6 |
great! thanks everyone! I'm going to order one then and try it out
|
|
November 20th, 2015, 03:19 | #7 |
in regards to the selector plate, this has everything I did: http://www.bingoairsoftworks.com/upd...ne-conversion/
|
|
|
Bookmarks |
Thread Tools | |
|
|