|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 26th, 2015, 14:13 | #1 |
What part of the gearbox is this?
Hey,
So I recently did a spring change on my G&G CM16 Raider with a Version 2 gearbox. I closed it up, tested it, and it works. I noticed afterward a small silver circle plate about one centimeter in diameter was left out. What is this part and is it important? Thanks! |
|
October 26th, 2015, 14:58 | #2 |
A shim, and while not likely critical, the gearbox will work more effectively with a proper shim placement.
__________________
|
|
October 26th, 2015, 16:41 | #3 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
picture?
if it's a solid plate, could be the motor height adjustment disc |
October 26th, 2015, 17:05 | #4 |
i think thats a shim...its normally on the gears...
It won't mess things up, but it helps the gears to take less stress if placed correctly...
__________________
|
|
October 26th, 2015, 17:42 | #5 |
"bb bukakke" KING!
|
this
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
October 26th, 2015, 18:06 | #6 |
It looks like a tiny dime.
It looks like a tiny dime, no hole in the middle just a solid silver disk as big as my pinky nail.
|
|
October 26th, 2015, 18:19 | #7 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
yeah probably the motor shim. It goes between the bottom of the motor and the adjustment screw
|
|
Bookmarks |
Thread Tools | |
|
|