Who's the best gun doc east canada?

warplane95 · July 14th, 2015, 18:58

Hi, i'm looking for a great gun doc eastern canada (everything to the right of ontario, ontario include).

I have soo much trouble with my gun.

What to do:
Probably a shiming, i'm not sure about the shiming of the other gun doc
figure why the gun can't shoot above 200-250fps, and crank it up to 400fps
r-hop (I have the patch, the m-nub and the installation kit)
Swiss cheese piston
Radius cylinder??
Anything else who can upgrade the gun.

I just want my gun to perform the best, I want to have kick ass range and something very consistent.

I'm from new-brunswick, Don't care if I need to spend 80$ on shipping

VFC VR16 gen 1
Part List
Lonex Aluminum Cylinder Head for Ver. 2
Lonex Cylinder Type 1
Lonex Extreme Toughness Piston (10-Teeth - Burgundy)
Lonex POM Ventilated Piston Head
Lonex M4/M16 POM Air Seal Nozzle
ASC™ V2/V3 Sorbo Buddy - 3/16" - 70 Hardness
Lonex M110SP non-linear spring
Lonex Enhanced Super Gear Set - High Speed Ratio (16:1)
Gate MERF 3.2
Tienly GT-45000 Ultra Performance Long Motor
Lonex Improved Hop-Up Bucking & Sleeve (50D)
HS5 Armory IR-Hop Z-Kit (ZKIT)
HS5 Armory M-Nubs (M-NUB)
HS5 R-hop ZKit Installation Tool
Lonex M4 Hop Up Unit
Prometheus 363mm barrel, should have ordered a 380mm.
Lonex Teflon Cylinder Grease
Lonex Teflon Gear Grease

EchoFourTwelve · July 14th, 2015, 20:06

EOD Steve/Stealth and pestobanana here in Ontario are my go-tos

wind_comm · July 14th, 2015, 20:16

I'd hastily recommend lurkingknight if he'd ever get around to sending my Japanese Maid.

warplane95 · July 14th, 2015, 22:09

I have great support with stealth, but I dont know the other three.

Zfurlong · July 16th, 2015, 21:02

I haven't seen the quality of pesto or lurking knight's work first hand, but the amount of knowledge those two have is extremely good. Based on the amount of knowledge they have from the forums I have read and with how often they post comments with help and advice for other members, I would highly recommend them based on sheer knowledge alone.

lurkingknight · July 16th, 2015, 23:52

Unfortunately i dont take shipped guns but maybe check with jeff gratto (spike) I think he's in halifax

MrCarrington · July 17th, 2015, 07:34

Definitely would recommend sending to to Spike. Been my go to for years even when I was living in NB

warplane95 · July 17th, 2015, 17:24

I'll send my gun to pestobanana. A lot of knowledge, I feel confident with him. also, i'll probably see spike if he go to the RTR V.

Spike · July 17th, 2015, 17:38

I won't be taking any more guns for a while, too much overdue stuff to catch up on/store closing to finalize/new job destroying my everything.

I will shoot you at RTR V though

warplane95 · July 17th, 2015, 17:41

Ohhh, you're the one who sell me a Socom Gear Les Baer.
The gun is awesome

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 14th, 2015, 18:58	#1
warplane95 Trader rating Join Date: Jul 2009 Location: Moncton	Who's the best gun doc east canada? Hi, i'm looking for a great gun doc eastern canada (everything to the right of ontario, ontario include). I have soo much trouble with my gun. What to do: Probably a shiming, i'm not sure about the shiming of the other gun doc figure why the gun can't shoot above 200-250fps, and crank it up to 400fps r-hop (I have the patch, the m-nub and the installation kit) Swiss cheese piston Radius cylinder?? Anything else who can upgrade the gun. I just want my gun to perform the best, I want to have kick ass range and something very consistent. I'm from new-brunswick, Don't care if I need to spend 80$ on shipping VFC VR16 gen 1 Part List Lonex Aluminum Cylinder Head for Ver. 2 Lonex Cylinder Type 1 Lonex Extreme Toughness Piston (10-Teeth - Burgundy) Lonex POM Ventilated Piston Head Lonex M4/M16 POM Air Seal Nozzle ASC™ V2/V3 Sorbo Buddy - 3/16" - 70 Hardness Lonex M110SP non-linear spring Lonex Enhanced Super Gear Set - High Speed Ratio (16:1) Gate MERF 3.2 Tienly GT-45000 Ultra Performance Long Motor Lonex Improved Hop-Up Bucking & Sleeve (50D) HS5 Armory IR-Hop Z-Kit (ZKIT) HS5 Armory M-Nubs (M-NUB) HS5 R-hop ZKit Installation Tool Lonex M4 Hop Up Unit Prometheus 363mm barrel, should have ordered a 380mm. Lonex Teflon Cylinder Grease Lonex Teflon Gear Grease __________________ Be gentle I'm French, If you don't undersetand what I say, just say it. Last edited by warplane95; July 14th, 2015 at 19:20..

July 14th, 2015, 20:06	#2
EchoFourTwelve Enjoy's Tight Groupings from behind in his Tight Pants Trader rating Join Date: Dec 2012 Location: Toronto, ON	EOD Steve/Stealth and pestobanana here in Ontario are my go-tos __________________ Guardians of Asgaard - KF14 "tight pants, tight groups, "

July 14th, 2015, 20:16	#3
wind_comm Trader rating Join Date: Jul 2011 Location: Calgary/Vancouver	I'd hastily recommend lurkingknight if he'd ever get around to sending my Japanese Maid. __________________ too busy tinkering to play.

July 14th, 2015, 22:09	#4
warplane95 Trader rating Join Date: Jul 2009 Location: Moncton	I have great support with stealth, but I dont know the other three. __________________ Be gentle I'm French, If you don't undersetand what I say, just say it.

July 16th, 2015, 21:02	#5
Zfurlong Trader rating Join Date: Sep 2014 Location: Oromocto	I haven't seen the quality of pesto or lurking knight's work first hand, but the amount of knowledge those two have is extremely good. Based on the amount of knowledge they have from the forums I have read and with how often they post comments with help and advice for other members, I would highly recommend them based on sheer knowledge alone. __________________ current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.

July 16th, 2015, 23:52	#6
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	Unfortunately i dont take shipped guns but maybe check with jeff gratto (spike) I think he's in halifax __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; July 17th, 2015 at 00:21..

July 17th, 2015, 07:34	#7
MrCarrington Trader rating Join Date: Jan 2007 Location: Halifax, Nova Scotia	Definitely would recommend sending to to Spike. Been my go to for years even when I was living in NB

July 17th, 2015, 17:24	#8
warplane95 Trader rating Join Date: Jul 2009 Location: Moncton	I'll send my gun to pestobanana. A lot of knowledge, I feel confident with him. also, i'll probably see spike if he go to the RTR V. __________________ Be gentle I'm French, If you don't undersetand what I say, just say it.

July 17th, 2015, 17:38	#9
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	I won't be taking any more guns for a while, too much overdue stuff to catch up on/store closing to finalize/new job destroying my everything. I will shoot you at RTR V though __________________ I change primaries like other people change socks.

July 17th, 2015, 17:41	#10
warplane95 Trader rating Join Date: Jul 2009 Location: Moncton	Ohhh, you're the one who sell me a Socom Gear Les Baer. The gun is awesome __________________ Be gentle I'm French, If you don't undersetand what I say, just say it.

Who's the best gun doc east canada?

Doctor's Corner