|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 29th, 2015, 20:22 | #1 |
"bb bukakke" KING!
|
need a replacement recoil spring
Okay, so a very cheap 5-7 landed in my lap recently.
Like all tm 5-7s, it blew up the hop up and outer barrel. Not a big deal, I have spares. What's missing is the recoil spring. There's no aftermarket replacement or upgrade I can find. And before I invoke some favors among some friends, I don't want to pay double shipping from japan to order one (yet). I'm looking for a similar sized spring in which there IS a replacement for. So I'd like folks to measure the free length of their recoil spring AND the outer diameter of it. The 5-7 recoil spring sleeves the outer barrel so as long as it's long enough and wide enough, that's a good enough starting point. There's a seemingly endless supply of hicappa and glock parts out there, so if anyone has a few seconds to measure some springs and let me know what's what, I'd appreciate it.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
Bookmarks |
Thread Tools | |
|
|