|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 27th, 2014, 22:43 | #1 |
AEG Motor(?) Problems
I'm having some issues with my gun, after shooting for a while the gun stops shooting, and after tightening the motor screw it continues to shoot. Do I need to replace a part to fix this? And if I do what part would that be? Any help is appreciated.
|
|
July 27th, 2014, 23:16 | #2 |
have you taken off the pistol grip plate (plate on the bottom of your pistol grip) and checked your motor connectors? they get shaken off all the time if loose.
Grab a pair of pliers and GENTLY squeeze the motor connectors a little.. this will tighten then up .. then slip them back over the tab they slip onto. if that's not a fix then you could be looking at an electrical short somewhere.. any recent work done on the gun? |
|
July 28th, 2014, 00:09 | #3 |
It was the connectors, thanks for the help.
|
|
|
Bookmarks |
Thread Tools | |
|
|