pts Masada SV Barrel is stuck

[Heavy]

trying to remove barrel from hopup (removed all screws)
, I turn the barrel to the right seem ok but cannot take it out of the hoppup casing.... I want to change the hopup bucking is broken

Need help

[Hectic]

prolly glued on, give it a lil love it should come.off. delete yer other thread, one is good enough lol

[Heavy]

https://www.youtube.com/watch?v=3Zj7...ature=youtu.be video showing frustrating

[Heavy]

Anyone
??

[Red Dot]

That is weird as fuck, I have the same model and with a little force it comes free. Counter-clockwise is to remove it, just take it as far as it will go and then try rotating at the barrel (not the quick-release mechanism) to see if it will work itself free.

I highly doubt this will help but make sure the hop-up is off, maybe in some strange way it's really compressing the bucking.

[Heavy]

thanks , I finally got it off had some kind defective notch in it know it off with a rubber mallet . and filed down so no isues but this was frustrating as hell ...will I am here should I even bother putiing the wii tech nozzle or leave the original.

[Red Dot]

I would, I got Stealth to install it. It's not the same dimensions as the stock nozzle but it works better than stock. Upped my FPS by around 10.

[pestobanana]

Nozzle requires opening the mechbox. Are you talking about the hop up unit?

Wii Tech nozzle is okay, not great but okay. Internal diametre is rather large so there is plenty of nozzle wobble. The O-ring inside did not seal well on the cylinder heads I tried it on, I had to replace it with another one that was thicker and of a smaller diametre before it sealed.

As for the hop up unit, the Wii Tech offers no improvement over the stock one other than being shiny. The Wii Tech adjustment arm is actually miles worse than the stock one.

[Heavy]

Thanks all