Main seals - Marui Hi-Capa

[Mafioso_Grande]

Hi everyone,

I have a heavily upgraded Marui Hi-Capa for sale and I'm wondering if you can help me out with leaky magazines. It's leaking at the base, from the main seal. Has anyone had luck identifying alternative O-rings or other means of sealing these up? I am going to try getting some extra thick silicone oil and letting them soak for a day, but if I need new seals entirely I'm not really sure where I can get them.

Any information is appreciated!

Regards
--Peter

[Sequential]

Peter, this is what you need.
https://www.google.ca/search?q=blue+...h=965#imgdii=_
Now go to Home Depot or Canadian Tire and buy some, and apply. Let it sit for 24 hours to let it dry. Then your o-ring/seals are completely rebuilt.

[jordan7831]

There is a nice thread detailing exactly how to use the gasket maker too!
Just be sure to allow it to cure for the full 24 hours before testing it. Otherwise it makes a huge mess.

http://airsoftcanada.com/showthread.php?t=88524

[Mafioso_Grande]

Awesome guys, thanks for the replies! I'll test it out today. You are gentlemen and scholars.

[Sequential]

Originally Posted by jordan7831

There is a nice thread detailing exactly how to use the gasket maker too!
Just be sure to allow it to cure for the full 24 hours before testing it. Otherwise it makes a huge mess.

http://airsoftcanada.com/showthread.php?t=88524

This is a great guide, I normally just dab it all over the place and squeeze the cap back on then wiping the excess off.
Always let it cure it for 24 hours otherwise its useless. I can't stress how important this is, I've re-done mags because of not letting it dry and thinking it would be done in 12 hours.