KJW 1911 cycle issue

Trayne wr3ck · June 22nd, 2013, 20:08

Trying to figure out why my 1911 wont cycle properly. I got it in a trade this way and have been trying to figure it out. It has a 170% recoil spring and a shooters design slide but i'm unsure of any other upgrades.

I think that the problem lies in the gas system somewhere but I have no experience with gbb pistols so i'm unsure what to be looking for. The only reason i really suspect that the problem lies there is simply the feel of the thing when i fire. It hardly makes a sound and the slide moves only a third of its travel length.

Any tips on where to start as far as diagnosing this thing would be very appreciated

Styrak · June 22nd, 2013, 20:12

Probably either the gas hammer or the nozzle.

p.phresh · June 25th, 2013, 12:14

If you're still having problems with this, and you can bring it to me I can have a look at it and see if I can diagnose the problem. Does sound like a worn striker or cracked nozzle though.

N_Force · June 25th, 2013, 12:30

I've found that on any gbb design, if one of the parts not in spec, that could cause problems, even TM that reliable brand. It happened on my 4.3 hicapa years ago and took me months to figure it out on the slide inside was not in spec. Just did a bit filing and it worked back normal. If you also have up graded parts in there and having troubles, you don't even have the original parts to swap back and test, and you have no experiences at all, pass it to your local gun doc to do it right for you would be your best bet. Diagnosis by your description and if you missed something, and or when we help you and you may not catch what it is, would be wasting your time and you have high chance to ruin your toy. If you still would like to DIY, be my guest, good luck and have fun!

redneck12 · June 25th, 2013, 13:07

Check your nozzle for cracks or damage, and while the blow back unit is still in your slide you cover the end of the nozzle with ur finger and push the nozzle back into the blow back unit. If its hard to do you still have a good air seal in your nozzle, if its easy to do and you hear a hissing noise you have a damaged or out of spec nozzle/blow back unit which may be the cause of your problem. Or it could be the spring that cycles your blow back unit is worn out or damaged in some way.

Trayne wr3ck · July 24th, 2013, 21:05

So i've been playing around with it and have a few questions.

1. Air seal is good to the point where the nozzle is actually tight to the piston head. is this bad?

2. Should the nozzle be moving back to rest on its own? The spring in the top of the blow back unit looks weak as all hell and it doesn't do anything since the nozzle is so tight to the piston.

Styrak · July 24th, 2013, 21:11

It should be moving freely.

Trayne wr3ck · July 29th, 2013, 05:22

Found something else weird. The "valve locker", the bit that sticks out the top on the left side of the midframe, doesn't have a spring. It just sits there in a depressed position. Could this be my demon?

Trayne wr3ck · August 1st, 2013, 01:27

Still looking for info about the valve locker.

Styrak · August 1st, 2013, 02:09

Yes there should be a spring there.

Trayne wr3ck · August 1st, 2013, 12:44

Quote:

Originally Posted by Styrak

Yes there should be a spring there.

Well that's fairly obvious. I'm curious to know what that valve locker does and weather or not its causing the gas problems

Styrak · August 6th, 2013, 23:55

Right side looking down the sights is the sear reset.
Left side looking down the sights is the valve release. It resets/releases that valve knocker from contacting the magazine once the slide comes back far enough. Basically keeps the valve open to get enough gas through the gun until the slide trips it. So yes that may very well be your problem. The valve knocker is making very light strikes since it can't stay "on". That's my thoughts.

Trayne wr3ck · February 18th, 2014, 15:34

Quote:

Originally Posted by Styrak

Right side looking down the sights is the sear reset.
Left side looking down the sights is the valve release. It resets/releases that valve knocker from contacting the magazine once the slide comes back far enough. Basically keeps the valve open to get enough gas through the gun until the slide trips it. So yes that may very well be your problem. The valve knocker is making very light strikes since it can't stay "on". That's my thoughts.

Figured i might as well update this thread in case anyone else has issues. This was indeed the issue. Replaced it and now it everything works fine

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 22nd, 2013, 20:08	#1
Trayne wr3ck Trader rating Join Date: May 2008 Location: Winnipeg	KJW 1911 cycle issue Trying to figure out why my 1911 wont cycle properly. I got it in a trade this way and have been trying to figure it out. It has a 170% recoil spring and a shooters design slide but i'm unsure of any other upgrades. I think that the problem lies in the gas system somewhere but I have no experience with gbb pistols so i'm unsure what to be looking for. The only reason i really suspect that the problem lies there is simply the feel of the thing when i fire. It hardly makes a sound and the slide moves only a third of its travel length. Any tips on where to start as far as diagnosing this thing would be very appreciated __________________ ~DEATH be not proud, though some have called thee Mighty and dreadfull, for, thou art not so, ~

June 22nd, 2013, 20:12	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Probably either the gas hammer or the nozzle. __________________ Airsoft Sales and Repair/Upgrade Services

June 25th, 2013, 12:30	#4
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	I've found that on any gbb design, if one of the parts not in spec, that could cause problems, even TM that reliable brand. It happened on my 4.3 hicapa years ago and took me months to figure it out on the slide inside was not in spec. Just did a bit filing and it worked back normal. If you also have up graded parts in there and having troubles, you don't even have the original parts to swap back and test, and you have no experiences at all, pass it to your local gun doc to do it right for you would be your best bet. Diagnosis by your description and if you missed something, and or when we help you and you may not catch what it is, would be wasting your time and you have high chance to ruin your toy. If you still would like to DIY, be my guest, good luck and have fun! __________________ aka Uncle Last edited by N_Force; June 25th, 2013 at 13:02..

June 25th, 2013, 12:14	#3
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	If you're still having problems with this, and you can bring it to me I can have a look at it and see if I can diagnose the problem. Does sound like a worn striker or cracked nozzle though.

June 25th, 2013, 13:07	#5
redneck12 Trader rating Join Date: Mar 2011 Location: Peterborough	Check your nozzle for cracks or damage, and while the blow back unit is still in your slide you cover the end of the nozzle with ur finger and push the nozzle back into the blow back unit. If its hard to do you still have a good air seal in your nozzle, if its easy to do and you hear a hissing noise you have a damaged or out of spec nozzle/blow back unit which may be the cause of your problem. Or it could be the spring that cycles your blow back unit is worn out or damaged in some way.

July 24th, 2013, 21:05	#6
Trayne wr3ck Trader rating Join Date: May 2008 Location: Winnipeg	So i've been playing around with it and have a few questions. 1. Air seal is good to the point where the nozzle is actually tight to the piston head. is this bad? 2. Should the nozzle be moving back to rest on its own? The spring in the top of the blow back unit looks weak as all hell and it doesn't do anything since the nozzle is so tight to the piston. __________________ ~DEATH be not proud, though some have called thee Mighty and dreadfull, for, thou art not so, ~

July 24th, 2013, 21:11	#7
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	It should be moving freely. __________________ Airsoft Sales and Repair/Upgrade Services

July 29th, 2013, 05:22	#8
Trayne wr3ck Trader rating Join Date: May 2008 Location: Winnipeg	Found something else weird. The "valve locker", the bit that sticks out the top on the left side of the midframe, doesn't have a spring. It just sits there in a depressed position. Could this be my demon? __________________ ~DEATH be not proud, though some have called thee Mighty and dreadfull, for, thou art not so, ~

August 1st, 2013, 01:27	#9
Trayne wr3ck Trader rating Join Date: May 2008 Location: Winnipeg	Still looking for info about the valve locker. __________________ ~DEATH be not proud, though some have called thee Mighty and dreadfull, for, thou art not so, ~

August 1st, 2013, 02:09	#10
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Yes there should be a spring there. __________________ Airsoft Sales and Repair/Upgrade Services

August 6th, 2013, 23:55	#12
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Right side looking down the sights is the sear reset. Left side looking down the sights is the valve release. It resets/releases that valve knocker from contacting the magazine once the slide comes back far enough. Basically keeps the valve open to get enough gas through the gun until the slide trips it. So yes that may very well be your problem. The valve knocker is making very light strikes since it can't stay "on". That's my thoughts. __________________ Airsoft Sales and Repair/Upgrade Services

KJW 1911 cycle issue

Doctor's Corner