Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

G&G feeding problem

:

Doctor's Corner

Reply
 
Thread Tools
Old August 23rd, 2005, 23:54   #1
Fox Hound
 
Fox Hound's Avatar
 
Join Date: Mar 2005
Location: North Bay / Stoney Creek
G&G feeding problem

hey i am using a G&G r4. Everything is stock btw. Ok the problem i have with my rifle is when i load the mag up with BBS and spin that thing on the bottom of my mag i can only fire 2-3 shots then i have to manually spin the mag thing at the bottom again for it to feed into my rifle. My rifle seems to be working great i think theres something with the mag. If i turn the rifle upside down it feeds perfectly. Or.... do i need an electric mag?
Fox Hound is offline   Reply With Quote
Old August 24th, 2005, 00:24   #2
concept_8
 
concept_8's Avatar
 
Join Date: Sep 2004
Location: sudbury Ont.
You have to wind the mag till it clicks with all the high caps I've used when the winder starts clicking the bb chamber is loaded up.
From a freshly filled mag it might seem to take a while but keep winding untill you her it click distinctly.
__________________
"Death in the tall grass"
concept_8 is offline   Reply With Quote
Old August 24th, 2005, 00:53   #3
damage
 
damage's Avatar
 
Join Date: Jan 2005
Location: Port Coquitlam, BC
Send a message via Yahoo to damage
loosen the screw on the tube stock if it is too tight. any further problems with your G&G feel free to pm me.
__________________
Team P.I.M.P. Vancouver BC
-Guntech(PM or E-mail only)
damage is offline   Reply With Quote
Old August 24th, 2005, 01:09   #4
dman
 
Join Date: Dec 2001
Is this the same with TM M4's? I noticed that my M4 doesn't feed too well on full auto for half of my mags. However, the other half work fine and dandy. Semi works fine on all mags.
__________________
- "dman"
dman is offline   Reply With Quote
Old August 24th, 2005, 02:13   #5
damage
 
damage's Avatar
 
Join Date: Jan 2005
Location: Port Coquitlam, BC
Send a message via Yahoo to damage
fully wind the wheel in the bottom until you feel it is tight. dont worry it wont do damage on the mag even if you over wind it. Then try semi and full auto. Then if it still fires like you said above. the problem lies in the gearbox to the hop-up. I dont see the mag will be the problem. I have 2 G&G M4 hicap and it feeds flawlessly. oh I have a G&G GR16 2 R4 as well.
__________________
Team P.I.M.P. Vancouver BC
-Guntech(PM or E-mail only)
damage is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 00:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.