|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 13th, 2013, 18:18 | #1 |
M249 hop up
hey guys and gals just a quick question im looking to replace my hop up bucking nub on my saw and not sure of a good one to get. if you would point me in the right direction would be awsome.
thanks kharyunn |
|
March 13th, 2013, 18:49 | #2 |
Prancercise Guru
|
If it's an A&K/Echo1/CA
Take a piece of heavy electric wire and strip the insulation off.
Take that piece of insulation and cut it a bit longer than the stock nub and use that.
__________________
Airsoft, where nothing is hurt but feelings. |
March 13th, 2013, 19:44 | #3 |
ah never thought of that i saw people do the pen thing but i would not do that.
good idea thanks |
|
March 13th, 2013, 20:03 | #4 | |
Suburban Gun Runner
|
That is the Crunchmeister mod. I did that and got an extra 40 feet out of my gun.
__________________
Quote:
|
|
March 13th, 2013, 20:04 | #5 |
I made on mine and works. But it is very hard as nub. I never tested the sheath electric. But in my test both and chose the one you like best.
And your Heatshield? |
|
March 15th, 2013, 18:58 | #6 |
lol its working great i wasnt going to get one just leave the canadian look but im running a para stock for nightfall so i needed to hide the batteries in the front lol
|
|
March 15th, 2013, 19:24 | #7 |
The big disadvantage of the stock para. This is for the battery. I have the full stock and I have a 9.6v 5000mAh. Send me a picture of your SAW.
Envoyé depuis mon SGH-I747M avec Tapatalk |
|
|
Bookmarks |
Thread Tools | |
|
|