KJW p226 problem

daishi · January 23rd, 2013, 12:18

Hey,

So I own 3 mags, two work perfectly, but my third seems to not like being filled. When I press the propane adapter to the fill nozzle it just sprays propane everywhere, and the mag gets a little fill as well. As well, with all my mags being 20+ shots is it normal to be able to fire constantly and then run out of gas with about 5 shots still in the mag due to not letting the mag cool down? It seems that if I rapid fire it will get to about 15+ shots out and then dump a tiny bit of gas before I have to reload.

Styrak · January 23rd, 2013, 12:22

For your first issue, have you lubed the fill valve?

As for the second issue, yes that's normal. Rapid fire increases cooldown effect and you won't be able to get as many shots out. This is even more of a factor with metal or heavy slides.

daishi · January 23rd, 2013, 12:26

Alright cool.

As for the fill valve ive lubed it with silicone but the propane just sprays all over the damn place on me.

Rommen · January 23rd, 2013, 12:54

daishi, if you are using the AI propane adapter you may need to cut a little bit off the tip of the fill stem. After lots of use I found mine wore down and became uneven/ jagegd around the edges and would not fill properly, spilling propane all over the place like you described. I cut the jagged section off so it was a clean, uninterrupted surface like it originally was. Worked fine after that, I have had to do several more times since then. My fill stem is about 3/4 as long as it originally was lol.

daishi · January 23rd, 2013, 13:11

The adapter is new and doesnt have an imperfections. Its fills all my other rifle mags and my other two pistol mags perfectly. :/

sammynac99 · January 23rd, 2013, 13:12

ensure the O-rings inside the propane tank are seated properly, this controls the flow of air from the propane tank into your adaptor, one time the internal o ring in my tank was unseated. :O, then u got mag issues :P

daishi · January 23rd, 2013, 15:46

Quote:

Originally Posted by sammynac99

ensure the O-rings inside the propane tank are seated properly, this controls the flow of air from the propane tank into your adaptor, one time the internal o ring in my tank was unseated. :O, then u got mag issues :P

The o ring inside the tank wouldn't come unseated for only one mag then fix themselves for the rest.

QKLee11 · January 23rd, 2013, 16:44

Just a be prepared for Magazines to malfuction on you...KJW Pistols are good but I find their pistol mags leak like sivs...I heard you can get CO 2 Mags, if you can that is what I would go with...I owned 2 KJW SIG SAUERS (Since sold), Pistol worked flawlessly but tha MAGS broke down alot, oil rings and stem valve.

FirestormX · January 23rd, 2013, 17:04

I have the same problem (I think) with my TM M9 mag. It's as if the fill valve is too small for the adapter. I have to order some feed lips, so I was thinking of just ordering a replacement valve as well.
Funny story about the feed lips - I was lending it to a friend at a game, and showed him "be careful not to let the mags fall on the ground, because they might fall like this *turns mag upside down* and land on the feed lip and- oh crap! *mag slips out of hand and lands on feed lip* and...do that". The next game another one did get dropped by someone borrowing it, with the same result.

Styrak · January 23rd, 2013, 23:02

Firestorm, TM mags are different as they have 2-way fill valve. They spew some gas when filling, then really spew when full.

FirestormX · January 24th, 2013, 12:33

I'm going to stop posting stupid things if you people are going to keep making me look stupid.

Thanks for the info though. I'd only ever had KJW mags, and thought they would be behaving exactly like a TM mag should.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 23rd, 2013, 12:22	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	For your first issue, have you lubed the fill valve? As for the second issue, yes that's normal. Rapid fire increases cooldown effect and you won't be able to get as many shots out. This is even more of a factor with metal or heavy slides. __________________ Airsoft Sales and Repair/Upgrade Services

January 23rd, 2013, 13:12	#6
sammynac99 Trader rating Join Date: Feb 2009 Location: Toronto	ensure the O-rings inside the propane tank are seated properly, this controls the flow of air from the propane tank into your adaptor, one time the internal o ring in my tank was unseated. :O, then u got mag issues :P __________________ You're a Lion You find yourself in the ocean,20 foot waves,Going up against a 800-pound tuna with his 20 or 30 friends?You lose that battle.You lose that battle 9 times out of 10.Well guess what? You’ve wandered into a school of tuna and we now have a taste of lion! We’ve communicated.Lion is good! Last edited by sammynac99; January 23rd, 2013 at 13:21..

January 23rd, 2013, 23:02	#10
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Firestorm, TM mags are different as they have 2-way fill valve. They spew some gas when filling, then really spew when full. __________________ Airsoft Sales and Repair/Upgrade Services

January 23rd, 2013, 12:54	#4
Rommen Trader rating Join Date: Jul 2011 Location: Mississauga, Ontario.	daishi, if you are using the AI propane adapter you may need to cut a little bit off the tip of the fill stem. After lots of use I found mine wore down and became uneven/ jagegd around the edges and would not fill properly, spilling propane all over the place like you described. I cut the jagged section off so it was a clean, uninterrupted surface like it originally was. Worked fine after that, I have had to do several more times since then. My fill stem is about 3/4 as long as it originally was lol.

January 23rd, 2013, 16:44	#8
QKLee11 Trader rating Join Date: Jan 2009 Location: Toronto	Just a be prepared for Magazines to malfuction on you...KJW Pistols are good but I find their pistol mags leak like sivs...I heard you can get CO 2 Mags, if you can that is what I would go with...I owned 2 KJW SIG SAUERS (Since sold), Pistol worked flawlessly but tha MAGS broke down alot, oil rings and stem valve.

January 23rd, 2013, 17:04	#9
FirestormX Trader rating Join Date: Jun 2010 Location: Mississauga, Ontario	I have the same problem (I think) with my TM M9 mag. It's as if the fill valve is too small for the adapter. I have to order some feed lips, so I was thinking of just ordering a replacement valve as well. Funny story about the feed lips - I was lending it to a friend at a game, and showed him "be careful not to let the mags fall on the ground, because they might fall like this turns mag upside down and land on the feed lip and- oh crap! mag slips out of hand and lands on feed lip and...do that". The next game another one did get dropped by someone borrowing it, with the same result.

January 24th, 2013, 12:33	#11
FirestormX Trader rating Join Date: Jun 2010 Location: Mississauga, Ontario	I'm going to stop posting stupid things if you people are going to keep making me look stupid. Thanks for the info though. I'd only ever had KJW mags, and thought they would be behaving exactly like a TM mag should.

KJW p226 problem

Doctor's Corner