|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 13th, 2012, 07:27
|
#1 |
|
ICS L85 Hop Up Unit - Problems
Hi Folks ! I am a Owner from a ICS L85A2. Its a well made done AEG, except the HU. The HU is weak, mayby have Leaks. The Gun made 65 - 265 fps only IMO not enough. The Gun should have 330 - 390 fps. Its possible to overrun the HU, its doesnt have a Stop.
Does anybody know, which HU fit the ICS L85 ? or have another Solutions ? Many Thx for Help 
|
|
|
|
|
November 13th, 2012, 23:00
|
#2 |
|
so are you saying you have over adjusted the hop-up unit?
FYI my ics l85 runs 335 fps on med but I upgraded the spring, with the stock spring and set on low it runs around 275. |
|
|
|
|
November 14th, 2012, 07:32
|
#3 |
|
Hi ! IMO its not possible to adjust the HU correctly. Thx for the Info about the Medium, which Spring do you use ?
|
|
|
|
|
|
November 15th, 2012, 00:54
|
#4 |
|
|
1 up from stock, and my friend has an l85 as well, newer than mine. he shoots just around that 275 mark. He has not adjusted the hop up at all since getting the AEG new. can you get it replaced under warranty?
we have not had much in the way of hop up issues. |
|
|
|
|
November 15th, 2012, 01:28
|
#5 |
|
The hop up on mine was crap out of the box but after adding an SCS Concave spacer and gaurder clear hop up bucking and Prometheus tight bore the thing is a tac driver now.
|
|
|
|
|
|
November 15th, 2012, 11:29
|
#6 |
|
Thx for Info ! Whre can I find a "SCS Concave spacer" ?
|
|
|
|
|
|
November 15th, 2012, 19:25
|
#7 |
|
PM Darklen (Bob) from Bent Barrel Airsoft (he is a super moderator here on the boards), they are in short supply these days but he might be able to point you in the right direction.
|
|
|
|
|
|
November 15th, 2012, 21:16
|
#8 |
|
It's pretty weird that you get 275 fps with the L85... With the stock spring, I don't recall getting lower than 350. Anyhow, on mine, the hopup adjustment does have a limit so you can't turn it forever... Something's broken?
Seems like it's time to take a look inside your L85! 
__________________
Valar Morghulis 
|
|
|
|
|
November 16th, 2012, 06:57
|
#9 |
|
@CDB many Thx for Infos !
@Fong Yes, you are right, its Time to bring it to an AEG Doctor. After the last Look it seems all OK, but all the Rubbers are not in right Position after turn the HU Wheel....anything ist strange Last edited by sixpence; November 17th, 2012 at 15:00.. |
|
|
|
|
|
November 16th, 2012, 08:38
|
#10 |
|
|
I just noticed that you are from Austria: I'm not aware of the Autrian airsoft laws... maybe you get weaker stock springs to reduce the joule output which would explain the lower fps.
Anyhow, you should check the hop-up unit (the adjustment screw should not make more than a complete turn), the hop-up rubber, the nozzle and if the gearbox is correctly seated (it's doubtful this is the cause of the problem but it's worth a look). Let us know how it goes.
__________________
Valar Morghulis
|
|
|
|
|
November 16th, 2012, 22:05
|
#11 |
|
|
Have you taken the gun apart yet? how does the hop-up look?
|
|
|
|
|
November 17th, 2012, 14:59
|
#12 |
|
@Fong Yes, a Comrade informed me, there are two Variants from ICS : One for Europe with weaker Spring and an international Version with M120 Spring. I will send ICS my Serial Number to clear this.
The Rubbers are always "twisted" after Movement the HU... I keep you informed... |
|
|
|
|
|
January 24th, 2013, 12:13
|
#13 |
|
ICS ist not answered for a long Time, mayby there are not interested to help out. Last Stand, Gun doesnt work properly, now have not more then 100 fps and cannot find any Fault...
Function only out of the Box for one Day. Exteriour is fine , well done but the Internals, especially the HU, are a Piece of Crap. Searching around for another one which fitted into the Gun, but without any Success. |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
