|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 11th, 2011, 03:05
|
#1 | |
|
rebuilding plastic, high wear spot????
so I've got this poor little mp7 that I'd like to use in a very special custom built project for my own madness.
the gun is beat up, but it works with one exception, the notch in the tappet plate that the gear actuates to move the tappet and load/seal the hop chamber is worn just to the point the gear skips it (yes the nozzle itself is in great shape!, I'm shocked too! LOL ) so I'm throwing this out there too the builders and customizers, is there anything you can think of I can use to rebuild this small relatively precise high wear spot? I've got some really wicked glue (zapagap) that I use for all the rest of my custom builds and it's bonding strength is second to none ... but I don't know if it will stand up to being smacked by the gear directly, and the repair is so small that the pieces cut to fit in would be maddeningly tiny. so... any suggestions?
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
|
|
|
|
July 11th, 2011, 03:41
|
#2 |
|
Fill the space with epoxy?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
July 11th, 2011, 06:37
|
#3 |
|
Harvester of Noobs' Sorrow
|
depending of the type of plastic it is, you might be able to use modeling cement. it would be the ideal situation as the cement causes the plastic to partially melt and fuse together.
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
|
|
|
|
July 11th, 2011, 07:29
|
#4 | |
|
Buy replacement tappet?
If you can't afford a 10$ part, maybe it's not a good time for "custom projects"...
__________________
Quote:
|
|
|
|
|
|
July 11th, 2011, 12:30
|
#5 | |
|
|
GAH! .. up till about 15 mins ago .. I hadn't been able to find a replacement tappet!
self face palm for failure at the interwebz ...
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
|
|
|
|
|
July 11th, 2011, 12:50
|
#6 |
|
http://www.airsoftgunrepair.com/mp7a...mentparts.html
I previously ordered a replacement air nozzle from them. No issues during my transaction. |
|
|
|
|
July 11th, 2011, 12:50
|
#7 | ||
|
Quote:
__________________
Quote:
|
||
|
|
|
|
July 11th, 2011, 13:23
|
#8 | ||
|
|
Quote:
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
||
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
