KJ Works p226 Cansoft + TM parts

[slntdth93]

Hey guys, had a few questions (and a possibility of me failing to use search properly):
-Does anybody know if the cansoft version of the p226 by KJW works with tm p226 mags? Theres quite a bit of talk a while back and I remember glancing over one talking about the cansoft one but seem to be unable to find it anymore.
-Would a TM cylinder work with this gun (the assembly of the two seem different)?

A bit off my topic header but, where could i buy silicon oil for application on the internals (the cylinder is scratching alot from the piston)

[thpethalK]

Some people have had success using TM mags in the KJW but generally and speaking from experience, no

[XZIVR]

If you want silicon oil for cheap, go to a hobby shop and get silicon shock oil for rc cars. It is high quality oil and.you can get it in a huge range of viscosities.

[dutch13]

I've tried using TM mags in two of my KJ 226's and none have worked. Although the TM split mag is better all around.

[Disco_Dante]

Originally Posted by dutch13

I've tried using TM mags in two of my KJ 226's and none have worked. Although the TM split mag is better all around.

Check the hammer of your Sigs. Is there a "1" engraved on it?

[slntdth93]

Originally Posted by XZIVR

If you want silicon oil for cheap, go to a hobby shop and get silicon shock oil for rc cars. It is high quality oil and.you can get it in a huge range of viscosities.

Which viscosity would you recommend (for greasing the internals)?

Originally Posted by Disco_Dante

Check the hammer of your Sigs. Is there a "1" engraved on it?

Not sure if this applies to me but, mine has a 2 on it.

[DEATH2000]

KJW guns are TM clones. My TM P226 takes a KJW mag fine. However the mag itself isn't great. Leaks constantly. Have you considered KWA P226 mags? I haven't tried them yet, but I'm hoping to soon.

[Styrak]

Originally Posted by DEATH2000

Have you considered KWA P226 mags? I haven't tried them yet, but I'm hoping to soon.

KWA is a completely different system (not TM clone).

[Eeyore]

Deadpool uses a KJ 226 and TM mags, so it obviously can work.

[DEATH2000]

Originally Posted by Styrak

KWA is a completely different system (not TM clone).

Thanks. I had yet to try it or check them out so thank you for saving me the time.

[XZIVR]

Originally Posted by slntdth93

Which viscosity would you recommend (for greasing the internals)?

Well, the oil that came with my last gun seemed like it was around 50 wt.

[Disco_Dante]

Originally Posted by slntdth93

Which viscosity would you recommend (for greasing the internals)?


Not sure if this applies to me but, mine has a 2 on it.

The two means it will accept TM magazines. A 1 means its the first version which will not accept TM magazines.