VSR/BAR-10 Magazine Getting Stuck

[gerardcb]

Hi!

I have a bar-10. When I put the magazine in, it fits perfectly, but I cannot pull it out even if I press the mag release. The mag release depresses/pushes in fine, but the magazine is just stuck inside all the time.

I have to unscrew the body screws and separate the body from the receiver/barrel assembly just to remove the magazine.

[gerardcb]

I actually figured out that the BAR-10 Body is a lot tighter than the VSR-10 Body. So I shaved some material off the sides and back of the magazine well and sure enough, I got the magazine to fit good inside the magwell and also it can be removed easier now =D

Thanks!