|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 16th, 2009, 13:12
|
#1 |
|
Joeyaglr444
|
Anyone wanna teach me Re-Shim and Mod my sig!
Howdy, Im looking for someone who has the expertise and time for a sig 552 If someone can re-shim and apply certain modifications(Replacing hop up, rubbers and tightbore) I wanna watch so i can learn myself.
Thanks in advance,
__________________
It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam. Last edited by Able1; July 16th, 2009 at 13:17.. |
|
|
|
July 16th, 2009, 14:02
|
#2 |
|
There's a few good threads here on the Swiss Arms SIG552; search a bit for them. I'm in the Toronto area and I've done extensive work to my 552. PM me with your exact location and maybe we can get together for lunch or something. Or I'll just walk you through it over some PM's
But first check out these threads: http://www.airsoftcanada.com/showthr...hlight=sig+552 http://www.airsoftcanada.com/showthread.php?t=82879 http://www.airsoftcanada.com/showthread.php?t=80763 and also watch the videos at Mechbox.com about V3 Mechboxes. |
|
|
|
|
|
July 16th, 2009, 14:04
|
#3 | |
|
vision impaired
|
Yea the mechbox.com stuff is awesome... Don't get frustrated when he does it 99billion times easier then you though. I recommend opening the mechbox inside a bag or something the first few times.
__________________
Quote:
|
|
|
|
|
|
July 16th, 2009, 15:51
|
#4 |
|
Well use the links from buzzrex and you'll find the only info worth reading. Buddy helped me and I still need to find some stuff for my SIG. The hop up rubber is for some reason thinner, so get lube/silicone to aid you in replacing it. The bushings need to be upgraded to metal and for shimming use mechbox.com to help you. The first link buzz has leads to a thread with another link its like 848tactical or something and shows how to get inside the bugger.
And dude if buzz wants to help and can show you take that oportunity cuz no one was here for me just 5 hours in my basement and a v2 from hell!
__________________
Con Murder Dark Rhino L.A. Airsoft |
|
|
|
|
July 16th, 2009, 20:21
|
#5 | |
|
People generally don't teach others because the ones that repair guns on a regular basis are billing customers for it.
It's like going to the garage and ask the mechanic to teach you how to do an engine maintenance so you won't have to go to the garage anymore.
__________________
Quote:
|
|
|
|
|
|
July 16th, 2009, 20:37
|
#6 | ||
|
vision impaired
|
Quote:
__________________
Quote:
|
||
|
|
|
|
July 17th, 2009, 07:09
|
#7 |
|
Tys
|
Getting into the 55x series isn't so hard, but it's a little fiddly at parts.
The mechbox is just a mechbox. What you're asking a guy to do, to do it right, would take quite a few hours. What a guy can do in an 2 hours can take 4+ hours to teach and explain. Depends on you as well. You might be sharp as a tack or dull as a butter knife. BUT...nothing beats hands on demonstration...quickest/easiest way to learn it. As an alternative, consider arranging the following: 1. Ask someone to show you shimming. Go through it completely. Key points, necessary resources, tips & tricks. That'll take an hour, maybe a bit longer if you go slow. You might not have your mechbox done by the end of it...but you'll have the knowledge to do it yourself. - don't get into having the guy show you how to disassemble your 55x...it's basically a time waster. You can get that info from youtube. 2. Swapping hopup rubbers and installing a barrel into a hopup is no biggie, but there's some key things to look out for. Keep in mind that a busy gun doc is probably going to charge you the cost of a repair. Best of luck, Tys |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
