View Single Post
Old April 10th, 2007, 19:58   #80
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Manufacturer, Model Name
HFC HG-185 (Glock 17)
2) Date Obtained
*Date Removed to protect the innocent *
3) Initial Cost
$200
4) New or Used
New (BuyAirsoft.ca)
5) Mechanical Problems
Jammed once. Never happened again. (March 2007)
Gun does not have a stabilizer o-ring, so it originally did not fire straight.
*EDIT*: Gun was a getting a little stiff/sluggish to shoot and it wouldn't lock back the slide all the time. I have just given it a good lube job for the first time and it seems to be
working smoothly now
*EDIT*: Gun broke. Slide has problems.
6) Esthetic Problems
Few marks off the paint from being played with.
7) Rounds fired between failures
1200-1500, gun/slide borked
8) Changes to Internals
Tape added around inner barrel to stabilize it. Now shoot much straighter.
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments
First Airsoft gun, and I'm fairly happy with it.



Manufacturer, Model Name
KJW P229
2) Date Obtained
*Date Removed to protect the innocent *
3) Initial Cost
$275
4) New or Used
New, on ASC classifieds
5) Mechanical Problems
Absolutely none, mag leaks if you leave it empty for a few days and you have to replace the o-ring. Keeping gas it in fixes this.
6) Esthetic Problems
Tiny spec of paint came off when i accidentally hit the gun with the magazine
7) Rounds fired between failures
500, no failures
8) Changes to Internals
None
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments
Second Airsoft gun, and I'm very happy with it. It's very heavy (full-metal) and powerful.
Seems that the hopup on the lowest setting is still making bb's fly a tiny bit upwards. Perhaps BB's heavier than .20 would help that.
EDIT: Heavier BB's do help
__________________

Airsoft Sales and Repair/Upgrade Services

Last edited by Styrak; January 7th, 2008 at 13:46..
Styrak is offline   Reply With Quote