Quote:
Originally Posted by Amos
If you disassembled it and re-assembled it there's a chance you didn't put a spring or two back in the right place.
... What are your cylinder specs? IIRC the Zero trigger has a strangely shaped sear that locks onto the piston... If you're using the stock marui piston the end of your piston may have stripped causing it to slip off... But this is all speculation, I don't have any experience with Zero Triggers (only PDI's V-Trigger)
Do a test for me, take the cylinder out and reach in to the sear that'll be in the body, try pushing on it.. it shouldn't move until you press the trigger down.
|
I'm using the orange zt piston, teflon cylinder, laylax head, ball bearing spring guide.
I took the cylinder out and when i pushed the sear, it didnt move like it should. U know, i was trying out my gun and it worked! it worked for like 5 shots then it didnt lock for about 2-3 pulls then it locked again. I didnt wanna experiment with it more because i'm afraid of wat might happen and the dmg it causes.
I gues i might bring it tommorrow on my skirmish, but i really have to have the sniper attitude of one shot, one kill. it prolly wont last for long working. Hopefully it does tho.