It's way too soft IMHO and will just dirty your gearbox or may just destroy it if a chunk comes lose or the whole thing for that metter.
Just my opinion.
Quote:
Originally Posted by DYORD
Anyhow... lately, i've been experiencing misfeeds on my AEG because i upgraded my battery to a higher voltage.... thus, i made my own sector chip using led. (yeah... soldering iron?!)...
Here's how i did it.
1. I melted the led to a tear shape, just enough amount of it to make the sector chip, on a smooth flat surface (preferably metal).
2. I used sand paper and file to re-shape the led.
3. drill it.. (in my case, i used a screw + screw driver... i hate standing up to look for our drill).
4. install it... If you have any doubts that your DIY sector chip doesnt fit tight, put a small amount of super glue.
Since the led it soo soft.. i'm not sure how long it will last.
btw.... the sector chip i made was the round type one.. wasn't able to take pictures... sorry...  |