Thread: G36C Help!!!
View Single Post
Old May 2nd, 2007, 09:27   #2
HaZarD SFD
 
HaZarD SFD's Avatar
 
Join Date: Sep 2005
Location: Ottawa
I think your timing is off. The gear that moves the piston has a little piece that
comes out to move the tappet plate. With the mechbox motor towards you
and the upper at 12 o'clock the little nub should sit at around 1 o'clock.

Also what Mah is your battery? If its a mini I dont really think 600mah will turn
that. Also check to make sure its fully charged. Also was the piston all the
way forward when you put it back in and lined up with the ridges on the sides
so it will flow smoothly?
__________________
No Comment.
HaZarD SFD is offline   Reply With Quote