Airsoft Canada - View Single Post

ILLusion · March 8th, 2007, 14:00

Get a higher torque motor. The Systema Magnum motor would be great for this application.

Might also want to switch to low resistance wiring and install a MOSFET to save the rest of the electrical circuit. The contacts in the trigger and the selector plate will burn themselves out very soon, with such a heavy spring.

What inner barrel are you using? A tightbore? and what weight BBs are you using? At such high velocities, you should be using heavier BBs. If you're still using 0.25g BBs, that much air pressure throws light BBs out of wack. I'd recommend 0.30g or heavier BBs.

March 8th, 2007, 14:00	#2
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Get a higher torque motor. The Systema Magnum motor would be great for this application. Might also want to switch to low resistance wiring and install a MOSFET to save the rest of the electrical circuit. The contacts in the trigger and the selector plate will burn themselves out very soon, with such a heavy spring. What inner barrel are you using? A tightbore? and what weight BBs are you using? At such high velocities, you should be using heavier BBs. If you're still using 0.25g BBs, that much air pressure throws light BBs out of wack. I'd recommend 0.30g or heavier BBs. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; March 8th, 2007 at 14:03..