Airsoft Canada - View Single Post - Inner barrel length for CQB-R

CAP`N`CRUNCH · October 21st, 2006, 10:55

hi there,

i had it at first,at 280mm and i was able to see the innerbarrel bling out of the
holes in the birdcage.

but like i said,
in my case,my flashhider is sitting right in front of the frontsight
(1mm between sight and flashhider)

now if you are using a type of outerbarrel,like the G&P´s M653,
then u would probably be good with it,because there u have like 4-5mm space
between the flashhider and the frontsight.

on the CA M15 CQB,there is at least 10mm between the flashhider and the frontsight.

i also have a spare outerbarell from guarder,wich can be used in two styles.

1.normal M733/M933 lenght (inner=300mm)

2.u can also unscrew that peace of outerbarrel and screw the flash hider right before to the frontsight wich makes it a "real" shorty type. (inner=270mm)

greeting´s

CAP

October 21st, 2006, 10:55	#4
CAP`N`CRUNCH Trader rating Join Date: Oct 2006 Location: GERMANY	hi there, i had it at first,at 280mm and i was able to see the innerbarrel bling out of the holes in the birdcage. but like i said, in my case,my flashhider is sitting right in front of the frontsight (1mm between sight and flashhider) now if you are using a type of outerbarrel,like the G&P´s M653, then u would probably be good with it,because there u have like 4-5mm space between the flashhider and the frontsight. on the CA M15 CQB,there is at least 10mm between the flashhider and the frontsight. i also have a spare outerbarell from guarder,wich can be used in two styles. 1.normal M733/M933 lenght (inner=300mm) 2.u can also unscrew that peace of outerbarrel and screw the flash hider right before to the frontsight wich makes it a "real" shorty type. (inner=270mm) greeting´s CAP