Airsoft Canada - View Single Post

lukvdh · October 9th, 2006, 22:16

About "piece one": you can remove it by tapping it "from within" the barrel. (I even used the inner barrel to do this, very gently of course).
"Piece one" is only held in place with a rubber o-ring. If you plan to experiment (see below) and need to remove it more times best thing to do is put some silicon oil on it. It will come out much easier.

But the bad news is: the "piece one" from a KJW M700 TakeDown is COMPLETELY DIFFERENT from the non-takedown version, so the silencer-adaptors won't fit.

IF you find a way to add a silencer to the takedown feel free to share the knowledge ;-)

October 9th, 2006, 22:16	#2
lukvdh Trader rating Join Date: Oct 2006	About "piece one": you can remove it by tapping it "from within" the barrel. (I even used the inner barrel to do this, very gently of course). "Piece one" is only held in place with a rubber o-ring. If you plan to experiment (see below) and need to remove it more times best thing to do is put some silicon oil on it. It will come out much easier. But the bad news is: the "piece one" from a KJW M700 TakeDown is COMPLETELY DIFFERENT from the non-takedown version, so the silencer-adaptors won't fit. IF you find a way to add a silencer to the takedown feel free to share the knowledge ;-)