Airsoft Canada - View Single Post - Reducing ROF

PoFF · June 21st, 2006, 22:55

Ok, I've modded my 9.6V to 8.4V, I'll keep the spring-gears-motor setup the same, and a metal piston taken from a G&G M4 is on the way (BTW, I've never heard of these pistons, it's true that during my time off from airsoft, I've quite missed the G&P and G&G boat, so I know very little about them and what they're made of).

I can only hope this'll work more than 6 hours...
I'll keep you guys posted, to thank you for your great help.

Best regards,
PoFF

June 21st, 2006, 22:55	#12
PoFF Trader rating Join Date: Dec 2001 Location: Laval, QC	Ok, I've modded my 9.6V to 8.4V, I'll keep the spring-gears-motor setup the same, and a metal piston taken from a G&G M4 is on the way (BTW, I've never heard of these pistons, it's true that during my time off from airsoft, I've quite missed the G&P and G&G boat, so I know very little about them and what they're made of). I can only hope this'll work more than 6 hours... I'll keep you guys posted, to thank you for your great help. Best regards, PoFF __________________ Founding member of the S.A.T.T - That's right, were BACK! The only purpose for a pistol is to fight your way back to the rifle you should have never laid down Visitez Arme ?* Feu.com - Le site des amateurs d'armes ?* feu francophones