Airsoft Canada - View Single Post

mcguyver · June 11th, 2006, 01:07

Turn you gun upside down (magwell facing upwards) and look into the magwell with the mag removed. You'll see the feed nozzle and you should also see the nozzle inside engaged in the hop chamber. If you fire a few times in semi, you should see the nozzle move.

If it doesn't move, you have a broken tappet, or the tappet is not being engaged by the sector gear (that actually does happen). Either way, you'll have to open up the mechbox again.

June 11th, 2006, 01:07	#2
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Turn you gun upside down (magwell facing upwards) and look into the magwell with the mag removed. You'll see the feed nozzle and you should also see the nozzle inside engaged in the hop chamber. If you fire a few times in semi, you should see the nozzle move. If it doesn't move, you have a broken tappet, or the tappet is not being engaged by the sector gear (that actually does happen). Either way, you'll have to open up the mechbox again. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.