Airsoft Canada - View Single Post - AS-02 Hits the big-time!

LockOut · November 19th, 2018, 22:04

I run the AS-01 with Nemo and EDGI upgrades, totaling 4 of these AS-01. I bought an AS-02 and from the looks of it, the piston is 90 degree and the sear is almost that of the triceratops sear EDGI makes. They have corrected a lot of the issues with this model. Action Army GEN 1 Aftermarket hopups do not work without ether modifying the unit or the inside of the outer barrel. There is a GEN 2 AA hopup unit that will work but as fare is I have tested all GEN 1 AA unites do not fit right.

November 19th, 2018, 22:04	#9
LockOut Trader rating Join Date: May 2015 Location: Barrie, Ontario	Ares I run the AS-01 with Nemo and EDGI upgrades, totaling 4 of these AS-01. I bought an AS-02 and from the looks of it, the piston is 90 degree and the sear is almost that of the triceratops sear EDGI makes. They have corrected a lot of the issues with this model. Action Army GEN 1 Aftermarket hopups do not work without ether modifying the unit or the inside of the outer barrel. There is a GEN 2 AA hopup unit that will work but as fare is I have tested all GEN 1 AA unites do not fit right.