Airsoft Canada - View Single Post

Arkainos · July 28th, 2018, 02:18

The piston rails in my king arms v2 gearbox and ICS upper gearbox are just a little too raised to take any of the several SHS/Rocket airsoft pistons I have. I have a variable speed dremel but I am unsure which accessory would be optimal for the task at hand. I don't have access to a vice so the angle I must approach the rail might be challenging. We can't touch the walls. Any advice or recommendations are appreciated.

July 28th, 2018, 02:18	#1
Arkainos Trader rating Join Date: Jul 2012 Location: Toronto, Ontario.	Grinding down piston rails. V2 The piston rails in my king arms v2 gearbox and ICS upper gearbox are just a little too raised to take any of the several SHS/Rocket airsoft pistons I have. I have a variable speed dremel but I am unsure which accessory would be optimal for the task at hand. I don't have access to a vice so the angle I must approach the rail might be challenging. We can't touch the walls. Any advice or recommendations are appreciated. __________________ "It is no nation we inhabit, but a language. Make no mistake; our native tongue is our true fatherland." -Emil Cioran Last edited by Arkainos; July 28th, 2018 at 10:28.. Reason: I learned 2 spell.