Quote:
Originally Posted by RainyEyes
What do you mean you're manually manipulating the cutoff lever?
You shouldn't even need to do that if you install the gearbox in the lower receiver of the gun so that the fire selector does that for you... Are you test firing the gearbox inside the receiver or outside the receiver? The v3 gearbox cage doesn't need the receiver to shoot but for troubleshooting the firing issues I would put it in the receiver to make sure it's an actual problem rather than the selector plate moving back to safe after you shoot... Which is normal...
|
This gearbox is coming out of an APS UAR. The trigger and fire selectors are all levers at the front of the gun, gearbox in the back (bunch of rods and such going back to activate everything). Thus I use the selector on the gearbox itself while it's out of the gun.
https://imgur.com/a/0ZYuE
See where the spring is by the selector plate? I can move the cutoff lever back into a position where it can allow the gun to fire again as the carriage is still jumping out. For some reason I can't get the thing to full auto still.