Airsoft Canada - View Single Post - Bolt Action Project: VSR G-Spec, M24 Full Upgrades Discussion (Parts, Mods, HPA/CO2 vs Spring, etc)

Drakker · September 12th, 2016, 21:04

Suppressors will work if you have a lot of over volume, which is the case of the G-Spec. Longer barrels will use more of that volume, reducing sound output significantly. With the exact same base setup, my G-Spec is a lot noisier with it's 300mm barrel than with a 509mm barrel in a Well super-long VSR10. I used to run my PDI cylinger and piston kit in said MB03 and it was very silent, even without the air brake and a sorbo pad. In my G-Spec its just fucking loud and even louder than some AEGs.

September 12th, 2016, 21:04	#18
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	Suppressors will work if you have a lot of over volume, which is the case of the G-Spec. Longer barrels will use more of that volume, reducing sound output significantly. With the exact same base setup, my G-Spec is a lot noisier with it's 300mm barrel than with a 509mm barrel in a Well super-long VSR10. I used to run my PDI cylinger and piston kit in said MB03 and it was very silent, even without the air brake and a sorbo pad. In my G-Spec its just fucking loud and even louder than some AEGs. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.