Airsoft Canada - View Single Post

lurkingknight · January 11th, 2015, 01:46

lol you're funny..

13:1 12:1 or 10:1 single sector
sorbo
tienly motor

you're going to hit into the 40 rps range.

120 spring and you'll be at 400ish with a .25.

Sorbo and swiss cheese the piston.

Going to need a pretty big battery, 11.1v 30C or better with 2400mah or better.

For a DSG you are looking at more than likely a bore up, 180 spring with the spring spacer but 35 rps is achievable with full stroke single sector gears.

14:1 DSG will probably net you in that area, but you're going to need an even bigger battery to drive the spring.

There's no point in doing this with a DSG, even if you used a short barrel. 363~ is where the volume will max out at... maybe a bit more, 407mm maybe with the bore up.

You obviously have no idea how DSG compression works, because a full cylinder isn't going to work, given that a DSG is a 9 tooth stroke vs a 15 tooth stroke.

January 11th, 2015, 01:46	#4
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	lol you're funny.. 13:1 12:1 or 10:1 single sector sorbo tienly motor you're going to hit into the 40 rps range. 120 spring and you'll be at 400ish with a .25. Sorbo and swiss cheese the piston. Going to need a pretty big battery, 11.1v 30C or better with 2400mah or better. For a DSG you are looking at more than likely a bore up, 180 spring with the spring spacer but 35 rps is achievable with full stroke single sector gears. 14:1 DSG will probably net you in that area, but you're going to need an even bigger battery to drive the spring. There's no point in doing this with a DSG, even if you used a short barrel. 363~ is where the volume will max out at... maybe a bit more, 407mm maybe with the bore up. You obviously have no idea how DSG compression works, because a full cylinder isn't going to work, given that a DSG is a 9 tooth stroke vs a 15 tooth stroke. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; January 11th, 2015 at 01:49..