Airsoft Canada - View Single Post

ShelledPants · October 26th, 2014, 19:51

Honestly, if you're going to use the wrong tools, at least use the right wrong tools. You could set up a drill and a steel wool setup to slow file the internals. It would cost less but take longer to do.

What you NEED to do is use a boring bar, a boring head, and have access to a mill with a decent dial indicator and a good vice.

The link you posted looks like for wood working? For center drilling a pilot hole, then cutting a larger hole using the pilot as a guide?

EDIT: I would just buy a new buffer... you're looking at 10-15$ in tooling, and several hours of labor, and I personally value my time at LEAST $20 an hour... Your choice though. Some people love the labor.

October 26th, 2014, 19:51	#19
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	Honestly, if you're going to use the wrong tools, at least use the right wrong tools. You could set up a drill and a steel wool setup to slow file the internals. It would cost less but take longer to do. What you NEED to do is use a boring bar, a boring head, and have access to a mill with a decent dial indicator and a good vice. The link you posted looks like for wood working? For center drilling a pilot hole, then cutting a larger hole using the pilot as a guide? EDIT: I would just buy a new buffer... you're looking at 10-15$ in tooling, and several hours of labor, and I personally value my time at LEAST $20 an hour... Your choice though. Some people love the labor. __________________ Ár skal r?sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. Last edited by ShelledPants; October 26th, 2014 at 19:55..*