Quote:
Originally Posted by ThunderCactus
Get a smaller lipo?
We use 11.1v 25c 1200mah sticks in the PTWs, and you can fit 3 of them in a crane stock with a short mosfet.
If you really do want to bore out the buffer tube, I doubt you'll be able to take out enough material to make a difference. Your problem you describe is of length, not diameter, which you can't make them any longer.
But if you did want to bore it out, what you're looking for is a lathe and a long carbide boring bar.
|
I should of been maybe a bit clearer, I meant boring it out to reduce the shelf length inside, as it's about 2 inches long.
My largest concern is not so much for myself as I have my stocks fully extended, but my girlfriend and 2 of my buddies who borrow my gear have shorter arms and like to have the stock as collapsed as possible, and the last thing I want is the liPo wires and battery getting crushed.
I love them, but sometimes they aren't very bright, and don't often heed my warnings..
But thank you, long carbide boring bar, information I was looking for.