Quote:
|
Originally Posted by Ace12GA
Quote:
|
Originally Posted by aftica
i think if you try this mod, you may find that the hammer simply ''follows'' the slide into battery, and may not hit the mag valve hard enough to cycle properly. the hammer has to be released by an ''auto sear'' when the slide is further ( or all the way ) forward into battery.
|
I've actually seen this mod done to a KSC Glock 17, and it works perfect; you get a full auto only Glock, that empties the mag in about 2 seconds, and wastes gas like mad. Its been a while since I have had a Glock 18C in my hands, but if memory serves, the 17 and 18C have a common lower frame, and the barrel/slides are totally interchangeable from frame to frame. Same goes for the 23F and 19. Someone correct me if I am wrong about this, but I am almost 100% sure about this. Sadly I haven't had a Glock 18C in about 4 years. |
The blowback chamber on the Full-Auto and Semi-Auto Glocks ARE NOT the same. You cannot fit the blowback chamber from a FA into the slide of a SA, or vice versa.